Setup

Part Names and Functions

17

12

15

14 -1

16 -1

14 -2

13

16-2

=Thermal head

This is the printhead. Avoid touching this with your fingertips and leaving grease or dirt on the printhead surface.

~Platen

Interlocked with the thermal head, it feeds media backwards or forwards.

!Upper sensor (!-1) and bottom sensor (!-2)

When used as a transparent sensor (for labels and tags with notches), it is used by matching the sensor markings of the upper sensor and the bottom sensor. When used as a reflective sensor, it is used by matching the sensor marking on the bottom sensor with the position of the black mark on the liner or media backing.

@Sensor arm

The media can be installed by raising this arm.

The media can be held in place by lowering this arm.

#Media guides

(Left fixed media guide (#-1) and right movable media guide (#-2))

The end of the media is matched to the left fixed media guide, then the right side movable media guide is moved horizontally to match it to the media size.

$Optional unit connector cover

It is opened when the cables of the cutter unit and the peeler unit are connected. Do not remove during normal use.

13