![](/images/new-backgrounds/1121902/121902105x1.webp)
Chapter 6 Configuring Your Printer Using The Menus
6.4 After Print Menu
The After Print Menu allows you to configure what the printer does once the label has been printed, including whether the printer feeds to the tear position after a batch of labels, whether the printer cuts the labels and what type of cutter or peeler is installed.
*After Print
| Note 1 |
| * | Note 2 ** |
|
|
| ||
Function | Function | Function | Function | Function |
Select | Off | Tear | PeelWait | Cut |
Key |
|
Range | Toggle |
*
Rewinder Action
*
PeelWait Delay
Rewinder | Rewinder | Rewinder |
Auto | On | Off |
Delay | Delay | Delay |
0.01s | 0.1s | 0.50s |
*
Peeler Action
**
Cutter Type
**
Cutter Action
Peeler
Backfeed
Cutter
Standard
Cutter
Backfeed
Peeler Through
Cutter
HeavyDty
Cutter Through
Note 1: The first menu option appears when UP key is pressed.
Note 2: The last menu option appears when DOWN key is pressed.
*This is not shown when peeler unit is not installed.
**This is not shown when cutter unit is not installed.
***Setting value varies, depending on the selected range of Function Select.
Inch mode
***
Paper | Position | Position | Position |
Position | 0.00IN | 2.00IN | |
* |
|
| Torque |
Rewinder | Torque | Torque | |
Torque | 1 | 4 | 5 |
Metric mode
***
Position Position Position
0.0mm
50.8mm
| Note 1 |
| Note 2 |
Repeat | Repeat | Repeat | Repeat |
Button | LabelSet | LastOne | Disabled |
− 41 −