zPower switch

Press this button to turn the power on or off.

zMaintenance cover

Not applicable for this product.

CAUTION

Do not open the maintenance cover.

Operation panel

POWER LED (green)

PAPER LED

ERROR LED (red)

(orange)

 

 

 

 

 

 

 

 

 

FEED button

zPOWER LED (green)

Lights when the power is on, turns off when the power is off. Flashes when data is incoming or a memory error has occurred.

zPAPER LED (orange)

Lights orange when paper is low (paper near-end) or there is no paper (paper end).

zERROR LED (red)

Flashes if the print head is hot, the paper cover is open, a cutter lock occurs, and so forth.

zFEED button

Press this button to feed paper.

In case of a cutter lock, remove the cause of the lock, close the paper cover, and then press the FEED button.

The printer enters the mode for setting memory switches and running self- printing.

Refer to 4.4 Self-printing

Refer to 4.6 Error Messages

Refer to 5.3 Manual Setting of Memory Switches

— 13 —