3.5 Partition for Paper Roll

Set the partition to the width of the paper roll you are loading. The partition is set at the factory to the position shown below.

zFor 3-inch type: 80-mm wide paper roll

zFor 2-inch type: 58-mm wide paper roll

1.Turn off the power.

2.Press the cover open lever.

3.Open the paper cover.

4.Set the partition in a slot that matches the size of the paper roll you are using. However, to use an 83-mm wide paper roll, remove the partition.

5.Refer to “5.3 Manual Setting of Memory Switches” to change the paper width settings.

Partition

*1

*1*2

Notes:

*1: 2-inch type (58/60 mm)

*2: 3-inch type (80/83 mm)

CAUTION

Make sure the partition is not slanted when setting it for 58-mm or 60-mm paper rolls.

— 22 —