2.2 Inside the paper cover

Auto cutter

Manual cutter

Paper-end sensor (PE sensor)

Platen

Button to change paper near-end sensor

Print head (thermal) Paper thickness

selection lever

Paper near-end sensor

(PNE sensor)

zPlaten

Feeds the paper.

zPaper near-end sensor (PNE sensor)

Detects when the paper is near the end of the roll. Adjust the position of the sensor to determine when it detects the end of the paper is near.

zButton to change paper near-end sensor

Change the position of the paper near-end sensor to match the paper being used.

Refer to 3.7 Adjusting the Paper Near-end Sensor

zManual cutter

For cutting the paper manually when printing is finished.

zAuto cutter

Automatically cuts the paper when printing is finished.

Refer to 5.3 Manual Setting of Memory Switches

zPrint head (thermal)

Prints characters and graphic data on paper (paper rolls).

zPaper end sensor (PE sensor)

Detects when there is no paper. Printing stops when this sensor detects there is no paper.

— 15 —