Getting Started
Storage and Shipping Conditions
Do not expose the scale to shocks, vibrations, moisture or extreme temperatures.
Unpacking the Scale
•After unpacking the scale, check it immediately for
any visible damage as a result of rough handling during shipment.
If you see any sign of damage, proceed as directed in the chapter entitled “Care and Maintenance,” under the section on “Safety Inspection.”
Save the box and all parts of the packaging until you have successfully installed your scale. Only the original packaging provides the best protection for shipment. Before packing your balance, unplug all connected cables to prevent damage.
Equipment Supplied
The equipment supplied includes the components listed below:
–Scale
–Weighing pan
–Pan support
–Shield ring
–Shield plate
–Gem tray
–AC adapter
–Dust cover
–Operating instructions
Installation Instructions
Your scale is designed to provide reliable weighing results under normal ambient conditions. When choosing a location to set up your scale, observe the following so that you will be able to work with added speed and accuracy:
–Set up the scale on a stable, even surface
–Avoid placing the scale in close proximity to a heater or otherwise exposing the balance to heat or direct sunlight
–Protect the scale from drafts that come from open windows or doors
–Avoid exposing the scale to extreme vibrations during weighing
–Protect the scale from aggressive chemical vapors
–Do not expose the scale to extreme moisture over long periods
Conditioning the Scale:
Moisture in the air can condense on the surfaces of
a cold scale whenever it is brought into a substantially war- mer place. If you transfer the scale to a warmer
area, make sure to condition it for about 2 hours at room temperature, leaving it unplugged from AC power.
Setting up the Scale
•Place the components listed below inside the chamber in the order given:
–Shield plate
–Shield ring
–Pan support
–Weighing pan
–Gem tray (not shown)
Connecting the Scale to
AC Power/Safety Precautions
Use only original AC adapters:
–for Europe: 6971948
–for the US: 6971947
–for the RSA: 6971949
–for Australia: 6971950
•Insert the
•The AC adapter rated to Class 2 can be plugged into any wall outlet without requiring any additional safety precautions
The ground is connected to the scale housing, which can be additionally grounded for operation.
Leveling the Scale
Level the scale any time you set it up in a new location. Use only the 2 front feet of the scale for leveling.
•Turn the 2 front feet as shown here in the illustration until the air bubble is centered in the level indicator
>In most cases this will require several adjustment steps
To protect against theft, use the mounting lug on the rear panel of the scale.
•Secure the scale at the place of installation, for example with a chain or a lock
2
