(26) Specifying/Canceling Inverted Characters
Code : [1B]h + [7B]h + n
*{0 is less than or equal to n is less than or equal to FF} Data is described in Hex code. Specifying/canceling inverted characters.
•"n" is valid only for the lowest bit (n0).
•Bit n (n0) means the followings.
n0 | Condition |
0 | Canceling inverted characters. |
1 | Specifying inverted characters. |
•This is valid only when this is specified at the beginning of a line.
•The printing example is shown below.
•The initial value of n is "0".
When inverted characters | When inverted characters |
have been canceled: | have been assigned: |
Paper feed direction
