iDP-3210 User’s Manual idp-3210 User's Manual

(33) Selecting Printing Position of HRI Characters (GS H n)

Code : [1d]H + [48]H + N

*{0 is less than or equal to n is less than or equal to 3} Data is described in Hex code. Selecting printing position of HRI characters for printing bar codes.

"n" means the followings.

n (Hex)

Printing Position

0No printing

1Above the bar code

2Below the bar code

3Both above and below the bar code

The initial value of n is "0".

(34)Defining Download Bit Image (GS * n1 n2 Dn)

Code : [1D]h + [2A]h + n1 + n2 Dn

* {1 is less than or equal to n1 is less than or equal to FF} {1 is less than or equal to n2 is less than or equal to 48}

{n1 x n2 1 is less than or equal to 1311} Data is described in Hex code. Defines downloading bit images of the number of dots specified by n1/n2.

The numbers of dots are n1 x 8 in horizontal direction and n2 x 8 in vertical direction.

Dn indicates bit image data.

The download bit image thus defined remains effective until redefinition, ESC @ execution, ESC &, or power OFF takes place.

A download character and a download bit image cannot be defined simultaneously. With this command executed, defined content of a download character is cleared.

Relations between the bit image data and the dot defined are shown below:

(35)Printing Download Bit Image (GS / m)

Code : [1D]h + [2F]h + m

*{0 is less than or equal to m is less than or equal to 3} Data is described in Hex code. Prints download bit images in a mode specified by m.

Modes can be selected by m are shown table for selection with m are shown below.

m

MODE NAME

DOT DENSITY IN

DOT DENSITY IN

 

 

VERTICAL DIRECTION

HORIZONTAL DIRECTION

0

Normal mode

156 DPI

154 DPI

1

Double wide mode

156 DPI

77 DPI

2

double high mode

78 DPI

154 DPI

3

Double wide/double high mode

78 DPI

77 DPI

When data exist inside the print buffer, this command is ignored.

When a download bit image has not been defined, this command is ignored.

A portion of a download bit image exceeding one line length is not printed.

A download character and a download bit image cannot be defined simultaneously.

60/67 CITIZEN

Page 60
Image 60
Citizen iDP-3210, Line Thermal Printer user manual 60/67 Citizen, Mode Name DOT Density