Safety Instructions
7Precautions when using thermal paper (printing paper)
Precaution
When using thermal printing paper, take the following precautions. Thermal printing paper becomes discolored or degenerates, resulting in faint printing.
•Do not put printed paper in bright light for a long period.
•Avoid high temperature, humidity, fluids, and sunlight.
•Do not use glue, adhesive, or adhesive tape containing a volatile organic solvent to retain printed thermal paper by applying it to ground paper.
•When you want to retain the paper for a long time, we recommend that you either use
•Do not keep the paper in contact with a PVC film etc. for a long time.
•Avoid ammonia. Keep it away from paper copied on a copier that uses ammonia.
•Do not let perspiration on your hands or oil touch the printed surface of thermal printing paper (surface to be printed or surface that has been printed).
•When the thermal printing paper will be stored, store it in a dark place where the average temperature is 25°C or less and the humidity is 65% or less.
7Precautions when installing the printing paper
Precaution
•Begin printing only after you have made sure that the printing paper is straight where it is ejected from the printing (thermal) head. If it is not straight, the paper will jam.
•To prevent the paper from being bent as it is fed into the printer, make sure that the front end of the paper is as shown below.
Good | Bad | Bad | Bad | |
|
|
|
|
|
12