Installing the Battery Pack
This printer is powered by the accessory battery pack and an AC adaptor. Charge and use the battery pack after installing it in the printer.
The battery pack is not charged when it is shipped from our factory. Be sure to charge it before using it for the first time. (Charging method: Page 21)
Do not use any battery or AC adaptor other than the specified products.
Danger: If you install a replacement battery pack that is the wrong type, there is danger of an explosion. When you have finished using a battery pack, dispose of it as instructed in this manual (page 10).
1 Open the battery cover on the back of the printer as shown in the figure.Slide it while lightly pressing the triangular mark on the cover with your finger.
2 Check the orientation of the battery pack, put it in place and push it in the direction shown by the arrow.
3 Close the battery cover and push the part shown by the arrow.Be sure that the cover is properly closed.
20