Setting the Modes

To enter one of the setting modes, press the relevant button whilst pulling the power switch towards you:

Mode

Button Combination

Print mode

FEED button

(Self print mode, HEX dump print mode)

 

Menu setting mode

MENU button

Interface setting mode

FEED button + MENU button

Self print mode
1 With paper loaded, press and hold the FEED button and power switch.

After all the LED have lit up, the POWER LED changes to flashing green.

After it changes, release all buttons.

Flashing (green)

2 Press the MENU button to change the POWER LED from flashing green to steady orange and start self printing.

3 Turn off the power to leave self print mode.

4

Steady (orange)

Example of printing in self print mode

Even if the MENU button is pushed during self print, self print will not be done continuously.

To restart self print, press the FEED button after printing is completed.

33