Appendix

Specifications

Printer

Category

 

Specification

Printing Method

 

Direct Thermal

Print Width

 

104 mm (4.09 in.)

Printhead

Total Dot Count

832 dots

 

Dot Pitch

8 dots/mm

 

Resolution

203DPI

 

Head life

50 million pulses (at printing rate of 12.5%, room

 

 

temp., and density setting of 0)

 

Durability

30km or more for 1P paper

 

 

2 sheets of copy paper (original + 1) 10km or

 

 

more

Printing speed

Thermal paper

400 dot lines/sec (max. 45 dots/line)

 

Copy paper

100 dot lines/sec. (max. 45 dots/line)

 

 

Conditions: room temp. 25°C / printing density

 

 

0/battery fully charged

Paper

 

Thermal paper sheets (cut paper), copy thermal

 

 

paper sheets (cut paper), thermal roll paper

Paper width

 

112 mm (4.41 in.)

Recommended

Thermal paper

TF50-KS-E2D (Nippon Seishi)

paper

Copy thermal paper

TLC#25 black (Naigai Carbon Ink)

 

 

If any paper other than the recommended

 

 

designated paper is used, it may be impossible to

 

 

ensure adequate printing quality, so do not use

 

 

such paper.

 

 

Roll paper

 

 

Copy thermal roll paper is not compatible, do not

 

 

use it.

Roll paper

Thermal paper

Max. diameter: 50 mm (1.97 in.)

diameter

 

Internal diameter (Min. diameter when rolling

 

 

begins): 8.0-8.5 mm (0.32-0.33 in.)

Paper length

Cut sheet paper

Min. paper length: 110 mm (4.33 in.)

 

 

Max. paper length: 250 mm (9.84 in.)

Media sensor

 

Reflection sensor (paper end and black mark)

Paper handling

 

Clam shell method (roll paper)

mechanism

 

Rear loading (cut paper)

 

 

 

46