Citizen Systems SR-260N manual Overflow / Error conditions, Stat

		x < 0 : y = 2n+1, I/n, n is an integer. (n ≠ 0)
		but –1 x 10 100 <	1	log x <100
			y
a b	c	Input：Total of integer, numerator and
		denominator must be within 10 digits
		(includes division marks)
		Result：Result displayed as fraction for
		integer when integer, numerator and
		denominator are less than 1 x 10 10
nPr, nCr		0≤r≤n, n≤9999999999, n, r are integers.
STAT		│x│＜1x10 50,│Σx│＜1 x 10 100

0≤ │Σx2│＜1 x 10 100, n, r are integers

x：n≠0,S：n＞1,σ：n＞0

	Range = 1 ~ r, 1 ≤ n ≤ r, 80 ≤ r ≤ 20400
ÆDEC	0 ≤ x ≤ 9999999999	(for zero or positive)
	– 9999999999 ≤ x ≤ –	1 (for negative)
ÆBIN	0 ≤ x ≤ 0111111111	(for zero, positive)
	1000000000 ≤ x ≤ 1111111111
	(for negative)
ÆOCT	0 ≤ x ≤ 3777777777	(for zero or positive)
	4000000000 ≤ x ≤ 7777777777
	(for negative)
ÆHEX	0 ≤ x ≤ 2540BE3FF( for zero or positive)
	FDABF41C01 ≤ x ≤ FFFFFFFFFF
	(for negative)

Overflow / Error conditions

A symbol “ E “ are indicated on the display when any of the following conditions occur and further calculation becomes impossible. Just press [ ON/C ] to release those overflow or error indicator and the subsequent calculation can then be performed.

1)When function calculations are performed with a number exceeding the input range.

2)When a number is divided by 0.

3)When the [ ( ] key is used more than 15 times in a single expression.

4)When a result (whether intermediate or final) or accumulated total in memory exceeds the limit. ( ±9.999999999 x 10 99)

5)When more than six pending operations.

E7

SR-260N_English_090324.rtf SIZE: 135x75mm / SCALE 2:1 / 2009/3/24