SR260C_English_black_090402.doc SIZE: 140x75mm SCALE 2:1
2009/4/15
-E9-
e x x ≤ 230.2585092
x 0 ≤ x < 1 x 10100
x 2 x < 1 x 10 50
1/x 1 x 10 –99 ≤ x < 1 x 10 100 , x ≠ 0
3x x < 1 x 10 100
x ! 0 ≤ x ≤ 69, x is an integer.
, x < 1 x 10 100
x y x > 0 : –1 x 10100 < y log x < 100
x = 0 : y > 0
x < 0 : y=n, 1/(2n+1), n is an integer.
but –1 x 10100 < y log x < 100
yx x > 0 : y ≠ 0, –1 x 10100 < y
1 log x < 100
x = 0 : y > 0
x<0 : y=2n+1, l/n, n is an integer.(n≠0)
but –1 x 10100 < y
1 log ⏐x⏐ 100
a b/c Input：Total of integer, numerator and
denominator must be within 10 digits (includes
division marks)
Result：Result displayed as fraction for
integer when integer, numerator and
denominator are less than 1 x 10 10
STAT ⏐x ⏐ < 1 x 10 50 , ⏐Σ x ⏐ < 1 x 10 100
0 ≤ Σ x 2 < 1 x 10100, 0 ≤ n < 1 x 10 100
x
: n ≠ 0 ; s : n > 1 ; σ : n > 0
OVERFLOW / ERROR CONDITIONS A symbol “ E ” is indicated on the display when any of the following
conditions occur and further calculation becomes impossible. Just
press [ ON/C ] to release those overflow or error indicator and the
subsequent calculation can then be performed.
• An intermediate or final calculation result exceed 1 x 10 100
(including memory calculations).
• You try to divide by zero.
• The number of low priority storage levels exceeds 6 in a
parentheses calculation or nesting parentheses exceed 7 in one
level. (Even if the number of levels is within 6, an error might occur
if you are using memories Ka or Kb, or program memories.)
• You try to use [ 2ndF ] [ Ka XÆK ] or [ 2ndF ] [ Kb XÆK ] while
memories Ka and Kb are being used for low–priority calculation
storage.