Citrix Systems 9.3 setup guide To install the rack rails on the rack, Attaching inner rails

Chapter 3 Installing the Hardware

Figure 3-1.Attaching inner rails

4.Repeat steps 1 through 3 to install the left inner rail on the other side of the appliance.

To install the rack rails on the rack

1.If you have a round-hole, threaded rack, skip to step 3.

2.Install square nut retainers into the front post and back post of the rack as shown in the following figures. Before inserting a screw, be sure to align the square nut with the correct hole for your 1U or 2U appliance. The three holes are not evenly spaced.

Figure 3-2.Installing Retainers into the Front Rack Posts

Figure 3-3.Installing Retainers into the Rear Rack Posts

3.Install the adjustable rail assembly into the rack as shown in the following figures. Use a screw to lock the rear rail flange into the rack. With the screw securing the rail in place, you can optionally remove the latching spring.

78