Tape Operations

Loading a tape

1.Press the [OPEN] button to open the flip down panel.

2.Load a tape into the cassette tape insertion slot.

Switching to the other side of the tape

1.Press the [BND] button to change tape direc- tion and playback.

∗The tape mechanism automatically reverses di- rection and engage playback at the end of the tape (auto reverse).

Ejecting a tape

1.Press the [OPEN] button to open the flip down panel.

2.Press the [TAPE EJECT] button to eject a tape. Take it out from the ejected position.

∗The radio mode is selected automatically few sec- onds after the [TAPE EJECT] button is pressed.

CAUTION

•Be sure to use this unit with the Flip down panel closed.

•Do not put any object or use it like a tray when the Flip down panel is open in a lying position.

•Be careful not to pinch your finger or hands when opening and closing the Flip down panel.

Listening to a tape already inserted

Press the [FNC] button to select the tape mode. Play starts automatically. If no tape is loaded in the unit, “NO CASS” appears in the display.

●Listening to another source while using FF or REW and APC (“monitor mode”)

Pressing the [FNC] button allows to set radio mode or CD/MP3 mode while fast-forwarding the tape, rewinding it, or searching for the begining of a tune in it.

Note:

¥Use the [FNC] button and select the tape function to resume tape playback.

Pausing play

1.Press the [ ] button to pause play. “PAUSE” appears in the display.

2.To resume tape play, press the [ ] button again.

Fast-forward/fast-backward

●Fast-forward

Press the [

] button.

●Fast-backward

Press the [

] button.

●Canceling FF/REW

Press the [ ] button.

APC (Auto Program Control) function

The APC function allows the tape to skip forward to the beginning of the next track or rewind to the start of the current track.

●Skipping forward to the next track (“APC- FF”)

During tape playback, press the [ ] button twice to fast-forward to the next track. The next track stars playing.

●Skipping backward to the current track

(“APC-REW”)

During tape playback, press the [ ] button twice to rewind to the start of the current track. The current track plays from the beginning.

●Canceling FF/REW APC to resume playback

Press the [ ] button.

Intro tape scan play

The intro tape scan allows the first 10 seconds of all the tracks on the tape to be played. This function continues on the tape until it is canceled.

1.Press the [SCN] button to start Intro tape scan. “SCN” lights in the display.

2.To cancel the intro tape scan, press the [SCN] button again. “SCN” goes off from the display and the current track continues to play.

∗When the end of the tape is reached during the intro tape scan, the tape mechanism auto- matically reverses direction and continues the intro tape scan.

∗If you select another mode during the intro tape scan, the mechanism automatically makes the intro tape scan stop when it finds the next track(APC function).

ADB340MP/ADB341MP 15