Operations Common to Each Mode

4.Press the [TITLE] button to return to the pre- vious mode.

Message display

When the unit is powered on or off, a message is displayed. The user can turn this message display on or off.

∗The factory default setting is “ON”.

1.Press and hold the [TITLE] button for 1 sec- ond or longer to switch to the adjustment se- lection display.

2.Press the [] or [] button to select “MESSAGE”.

3.Turning the [VOLUME] knob clockwise to set the message display to “ON”, or turning the [VOLUME] knob counterclockwise to set the message display to “OFF”.

4.Press the [TITLE] button to return to the pre- vious mode.

Setting the method for title scroll

Set how to scroll in CD-TEXT or MP3 Title.

∗The factory default setting is “ON”.

1.Press and hold the [TITLE] button for 1 sec- ond or longer to switch to the adjustment se- lection display.

2.Press the [] or [] button to select “SCROLL”.

3.Turning the [VOLUME] knob clockwise or counterclockwise and select “ON” or “OFF”.

●ON:

To scroll automatically.

●OFF:

To scroll just 1 time when the title was changed or the title key was pressed.

4.Press the [TITLE] button to return to the pre- vious mode.

Turning the screen saver function on or off

This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the Operation Status indication area of the display. You can turn on and off this function.

If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is “OFF”.

1.Press and hold the [TITLE] button for 1 sec- ond or longer to switch to the adjustment se- lection display.

2. Press the [

 

] or [ ] button and select

“SCRNSVR

 

”.

 

 

3.Press the [ ] button.

4.Turning the [VOLUME] knob clockwise to “ON” or counterclockwise to “OFF”.

5.Press the [TITLE] button to return to the pre- vious mode.

Adjusting the display contrast

You can adjust the display contrast to match the angle of installation of the unit.

∗The factory default setting is “5”. (Adjustment level: 0 to 10)

1.Press and hold the [TITLE] button for 1 sec- ond or longer to switch to the adjustment se- lection display.

2. Press the [ ] or [ ] button to select “CONTRAST”.

3.Turning the [VOLUME] knob clockwise or counterclockwise to adjust the contrast.

4.Press the [TITLE] button to return to the pre- vious mode.

Selecting AUX IN sensitivity

Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.

∗The factory default setting is “MID”.

1.Press and hold the [TITLE] button for 1 sec- ond or longer to switch to the adjustment se- lection display.

2. Press the [ ] or [ ] button to select “AUX SENS”.

3.Turning the [VOLUME] knob clockwise or counterclockwise as needed and select from “HIGH”, “MID” or “LOW”.

4.Press the [TITLE] button to return to the pre- vious mode.

Setting the DEMO mode

The demonstration of each function is repeatedly shown on the display screen. The demonstration starts about few seconds after power off.

∗The factory default setting is “ON”.

1.Press and hold the [TITLE] button for 1 sec- ond or longer to switch to the adjustment se- lection display.

ADB340MP/ADB341MP 17