Basic Operations

Setting EQ effects to ON/OFF

∗The factory default setting is “ON”.

1. Press and hold the [EQ] button for 1 second

or longer to turn off the EQ effect. “ ” goes off in the display.

2. Press and hold the [EQ] button for 1 second

or longer to turn on the EQ effect. “ ” lights in the display.

Switching the spectrum analyzer display patterns

You can select one out of 9 patterns or set it to off.

∗The factory default setting is “SND BEAT”.

1.Each time you press the [SPE/ANA] button, the spectrum analyzer display pattern changes in the following order:

SND BEAT ➜ SND WAVE ➜ SND RISE ➜ SND SNOW ➜ CROSS ➜ EXPAND ➜ HO- RIZON ➜ SHADOW ➜ S/A SCAN ➜ S/A OFF

➜ SND BEAT...

Note:

The spectrum analyzer display is unavailable during these operations below;

¥Seek tuning and auto store in radio mode.

¥Pause.

¥When ÒNO DISC”, “NO CASSÓ or an error mes- sage appears in the display.

¥When fast-forwarding, fast-backwarding or paus- ing the tape in tape mode.

Radio Operations

FM reception

F o r e n h a n c e d F M p e r f o r m a n c e t h e ® tuner includes signal actuated stereo control and Multipath noise reduction cir- cuits.

Listening to the radio

1.Press the [FNC] button and select the radio mode.

2.Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the follow- ing order:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3. Press the [

] or [

] button to tune in the

desired station.

 

Tuning

There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

Seek tuning

1.Press the [BND] button and select the desired band (FM or AM).

∗If “ ” is lit in the display, press and hold

the [BND] button for 1 second or longer. “ ” in the display goes off and seek tuning is now available.

2.Press the [] or [] button to automati- cally seek to the next station.

When the [] button is pressed, the sta- tion is sought in the direction of higher fre-

quencies; if the [] button is pressed, the station is sought in the direction of lower fre- quencies.

Manual tuning

There are 2 ways available: Quick tuning and step tuning.

When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired fre- quency.

1.Press the [BND] button and select the desired band (FM or AM).

∗If “ ” is not lit in the display, press and hold

the [BND] button for 1 second or longer. “ ” lights in the display and manual tuning is now available.

2.Tune into a station.

10 ADB340MP/ADB341MP