∗ Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will mo- mentarily switch to that function’s display, then revert back to the preferred display several seconds after the adjustment.
∗ When you have entered a title in a CD, it ap- pears in the main display. If you have not en- tered a title, “NO-TITL” appears in the title dis- play instead. For information on how to enter a title, refer to the subsection “Entering titles”in the “Operations Common to Each Mode”.

5. OPERATIONS

Basic Operations

Note: Be sure to read this chapter referring to the front diagrams of

chapter Ò3. CONTROLSÓ on page 5 (unfold).

CAUTION

Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.

The clock is displayed when the ignition key is turned to the ACC (accessory) or IGN (igni- tion-on) position even when the unit power is off. In some cars, the clock may momentarily disappear when the ignition key is turned to the START position. The clock will reappear after the engine has started and the ignition key is released to the IGN (ignition- on) position.

Mute

Turning the volume down quickly.

Press the [MUTE] button.

Each time the button is pressed the Mute turns ON or OFF.

When it’s ON, the “MUTE” indicator blinks.

Switching the display

Press the [DISP] button to select the desired dis- play.

Each time you press the [DISP] button, the display switches in the following order:

●In Tuner source

Frequency ➜ Clock ➜ Frequency...

●In CD source

Clock ➜ Track Number & Track Time ➜ Clock...

Turning on/off the power

●In Tape source

Notes:

Playback direction & Current status ➜ Current

 

¥ Be careful about using this unit for a long time with- status ➜ Clock ➜ Playback direction & Current out running the engine. If you drain the carÕs bat- status...

tery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1. Press the [FNC] button.

2. The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.

3. Press and hold the [FNC] button for 1 second or longer to turn off the power for the unit.

Selecting a mode

1.Press the [FNC] button to change the mode of operation.

2.Each time you press the [FNC] button, the mode of operation changes in the following order:

Radio mode ➜ CD mode ➜ Tape mode ➜ AUX mode ➜ Radio mode...

Adjusting the volume

Turning the [VOLUME] knob clockwise to increase the volume, or turning the [VOLUME] knob counterclockwise to decrease the volume.

∗The volume level is from 0 (minimum) to 35 (maxi- mum).

8 ADB340MP/ADB341MP