Basic Operations

Adjusting the bass

Adjusting the fader

This adjustment can be performed when the EQ operation is set to “OFF”.

1.Press the [A-M] button and select “BASS”.

2.Turning the [VOLUME] knob clockwise to em- phasize the bass, or turning the [VOLUME] knob counterclockwise to attenuate the bass.

∗The factory default setting is “0”. (Adjustment range: − 7 to +7)

1.Press the [A-M] button and select “FAD”.

2.Turning the [VOLUME] knob clockwise to em- phasize the sound from the front speakers, or turning the [VOLUME] knob counterclockwise to emphasize the sound from the rear speak- ers.

∗The factory default setting is “0”. (Adjustment range: F9 to R9)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

3.When the adjustment is complete, press the[A-M] button several times until the func- tion mode is reached.

Adjusting the middle

This adjustment can be performed when the EQ operation is set to “OFF”.

1.Press the [A-M] button and select “MID”.

2.Turning the [VOLUME] knob clockwise to empha- size the treble, or turning the [VOLUME]knob coun- terclockwise to attenuate the treble.

∗The factory default setting is “0”. (Adjustment range: − 7 to +7)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the treble

This adjustment can be performed when the EQ operation is set to “OFF”.

1.Press the [A-M] button and select “TREB”.

2.Turning the [VOLUME] knob clockwise to empha- size the treble, or turning the [VOLUME]knob coun- terclockwise to attenuate the treble.

∗The factory default setting is “0”. (Adjustment range: − 7 to +7)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the balance

1.Press the [A-M] button and select “BAL”.

2.Turning the [VOLUME] knob clockwise to empha- size the sound from the right speaker, or turning the [VOLUME] knob counterclockwise to empha- size the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L9 to R9)

3.When the adjustment is complete, press the[A-M] button several times until the func- tion mode is reached.

Adjusting MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.

∗The factory default setting is “OFF”.

1.Press and hold the [A-M] button for 1 second or longer to turn on the MAGNA BASS EX- TEND effect. “MB-EX” lights in the display.

2.Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EX- TEND effect. “MB-EX” goes off in the display.

Selecting the EQ menu

About the EQ function:

The Equalizer allows correction and modification of the frequency response for selected frequency ranges, thus allowing the creation of your own unique sound.

1.Press the [EQ] button.

2.Turning the [PRESET] knob either clockwise or counterclockwise to select the desired EQ menu.

∗EQ menus cannot be memorized per CD and ra- dio mode, etc.

●EQ menus

IMPACT : Low and high frequencies empha- sized.

B-BOOST : Low frequencies emphasized.

ACOUSTIC : Medium frequencies (vocals) em- phasized.

FLAT : Original sound.

3.Press the [EQ] button to return to the original mode.

ADB340MP/ADB341MP 9