XM Satellite Radio Operations
English
This unit can control the satellite radio receiver (XM
Note:
•When the function is differ depending to the connected receiver, they are distinguished by the following notations:
“XM”: for an XM Satellite Radio
Selecting a Satellite Radio mode
1.Press the [SRC] button.
The system changes to the specified Satellite Radio mode.
Channel input directly
This function allows you to input the channel No. directly.
1.Press and hold the [DISP] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [x] or [v] button to select “CHANNEL”.
3.Press the [ 
] button.
4.Press the [w] or [z] button to input the channel No.
5.Press and hold the [ 
] button for 1 second
Selecting a band | or longer to select the channel. |
1. Press the [BND] button to select a band. |
|
This changes the reception band as follows:
XM1 ➜ XM2 ➜ XM3 ➜ XM1 ...
●Information displayed during reception The following information is displayed when the satellite radio cannot be received normally.
•When the antenna is not be connected :
“CHECK ANTENNA”
•When the mini tuner is not be connected :
“CHECK XM TUNER”
•When no signal is received: “NO SIGNAL”
•When a channel is being tuned in (no signal is yet received): “LOADING”
•A channel without a broadcast has been selected: “OFF AIR”
•An unviable channel has been selected: “CH UNAVL”
•A channel not covered by your contract: “UNAUTH”
Confirming your XM ID
1.Press the [x] or [v] button to switch to channel 0.
2.The XM ID No. appears in the display.
Displaying channel labels
1.Press the [DISP] button to select the desired channel label.
Channel ➜ Category ➜ Name (Title) ➜ Channel ...
Setting channel tuning
This function allows you to tuning a channel directly or indirectly.
∗The factory default setting is “OFF”.
1.Press and hold the [DISP] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [x] or [v] button to select “DIRECT”.
3.Press the [w] or [z] button to select “ON” or “OFF”.
• ON:
Press the [ 
] button to switch to another channel after tuning operations. Otherwise, the operation will switch to the other channel automatically after 2 seconds.
• OFF:
Press the [ 
] button to switch to another channel after tuning operations. Otherwise, the operation will return to the previous channel after 5 seconds.
Channel selection
1.Channels are selected with the [x] or [v] button.
For details, see the following operation descriptions.
Note:
The audio output is muted and other button operations are not accepted during channel selection.
12 CX609
