Clarion CX609 Basic Operations, Setting the MAGNA BASS EXTEND, Adjusting the BASS/MID/TREBLE

Basic Operations

3-1. Each time you press the [w] or [z] button, the tone effect changes in the following order:

“CUSTOM” ↔ “EXCITE” ↔ “IMPACT” ↔ “B-BOOST” ↔ “OFF”

CUSTOM : user custom

EXCITE : bass and treble emphasized

		mid emphasized
IMPACT	: bass and treble emphasized
B-BOOST	: bass emphasized
OFF	: no sound effect
When “CUSTOM” is set:
3-1. Press the [			] button.

3-2. Press the [x] or [v] button to select the

	“BASS, MID” or “TREBLE” mode to adjust.
3-3.	If you want to set the flat, press the [			]
	button to return to the “CUSTOM” mode,
	then press and hold the [		] button
	(1sec.), bass/mid/treble characteristics
	become flat and switch to the “CUSTOM”
	mode.
When “EXCITE/IMPACT/B-BOOST” is set:
3-1.	Press the [	] button.
3-2.	Press the [w] or [z] button to adjust the
	setting in the range of –3 to +3.
	∗ The factory default setting is “0”.
3-3.	Press the [	] button to return to the

previous mode.

BASS<F>: The factory default setting is “50”. (Adjustment range: 50/100/200)

BASS<Q>:The factory default setting is “1”. (Adjustment range: 0.7/1/1.4/2)

MID<G> : The factory default setting is “0”. (Adjustment range: +7 to -7)

MID<F> : The factory default setting is “500”. (Adjustment range: 500/1K/2K)

MID<Q> : The factory default setting is “1”. (Adjustment range: 0.7/1/1.4/2)

TREBLE<G>:The factory default setting is “0”. (Adjustment range: +7 to -7)

TREBLE<F>:The factory default setting is “10K”.

(Adjustment range: 5K/10K/15K) TREBLE<Q>:The factory default setting is “1”.

(Adjustment range: 0.7/1/1.4/2)

3-4. Press the [ ] button to return to the previous mode.

●Setting the MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust the low frequencies like the normal sound adjustment function, but emphasizes the deep bass frequencies to provide you with a dynamic sound.

∗The factory default setting is “OFF” (off).

2-1. Select “M-B EX”.

3-1. Press [w] or [z] button to select “ON” or “OFF”.

English

●Adjusting the BASS/MID/TREBLE

This adjustment can be performed only when the BEAT EQ is set to “CUSTOM”.

Note:

•While connected with the external amplifers, please do not set the “BASS/MID/TREBLE” in the maximum level. Otherwise the speakers may be damaged.

3-1. Press the [ ] button.

3-2. Press the [x] or [v] button to select as following order.

“BASS<G>” ↔ “BASS<F>” ↔

“BASS<Q>” ↔ “MID<G>” ↔ “MID<F>” ↔ “MID<Q>” ↔ “TREBLE<G>” ↔ “TREBLE<F>” ↔ “TREBLE<Q>”

∗The factory default setting is “BASS G”. 3-3. Press the [w] or [z] button to select the

setting.

BASS<G>:The factory default setting is “0”. (Adjustment range: +7 to –7)

●Adjusting the balance

2-1. Select “BALANCE”.

3-1. Press the [w] or [z] button to adjust the balance of the right and left speakers.

∗The factory default setting is “CENTER” (center). (Adjustment range: RIGHT12 to LEFT12 (right 12 to left 12))

●Adjusting the fader

2-1. Select “FADER”.

3-1. Press the [w] or [z] button to adjust the balance of the rear and front speakers.

∗The factory default setting is “CENTER” (center). (Adjustment range: FRONT12 to REAR12 (front 12 to rear 12))

●Setting the subwoofer

You can set the low pass filter of subwoofer.

This adjustment can be performed only when the “REAR/S-W” is set to “S-WOOFER”.

2-1. Select “LPF”.

CX6099