Functions of Remote Control Unit Buttons
●CD changer mode
[BND] button
•Press to switch to next disc in ascending order.
[x], [v] buttons
•Press to move the tracks up and down.
•Press and hold the button (1 sec.) to perform
[ 
] button
•Switches between playback and pause.
[SCN] button
•Press to perform scan play.
•Press and hold the button (1 sec.) to perform disc scan play.
[RPT] button
•Press to perform repeat play.
•Press and hold the button (1 sec.) to perform disc repeat play.
[RDM] button
•Press to perform random play.
•Press and hold the button (1 sec.) to perform disc random play.
●iPod mode
[x], [v] buttons
•Press to move the tracks up and down.
•Press and hold the button (1 sec.) to perform
[ 
] button
•Switches between playback and pause.
[RPT] button
•Press to perform repeat play.
[RDM] button
•Press to perform random play.
•Press and hold the button (1 sec.) to perform all random play.
English
Inserting the Battery
1Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration.
2Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards.
3Press the battery in the direction indicated by the arrow so that it slides into the compartment.
4Replace the cover and slide in until it clicks into place.
Notes:
Misuse may result in rupture of the battery, producing leakage of fluid and resulting in personal injury or damage to surrounding materials. Always follow these safety precautions:
•Use only the designated battery.
•When replacing the battery, insert properly, with +/– polarities oriented correctly.
•Do not subject battery to heat, or dispose of in fire or water. Do not attempt to disassemble the battery.
•Dispose of used batteries properly.
Insertion guide
CR20 
2
5
CX6097
