Clarion DB625MP owner manual Radio Operations

Radio Operations

Tuning Mode

Choose the tuning mode.

Press the [T-M] button.

Each time the button is pressed the Tuning mode switches as shown below.

Tuning mode	Display	Operation
Auto seek	“Auto 1”	Automatic search
		for a station.
Preset scan	“Auto 2” Search in order of
seek		the stations in the
		Preset memory.
Manual	“Manual”	Normal manual
		tuning control.

Tuning

Selecting the station.

1.Select tuner source Press the [FNC] button. Select the “TUNER” display.

2.Select the band

Press the [FM] or [AM] button.

Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands.

3.Tune up or down band

Press the [a] or [d] button.

Note:

•During reception of stereo stations the “ST” indi- cator is ON.

Station Preset Memory

Putting the station in the memory.

1.Select the band

Press the [FM] or [AM] button.

2.Select the frequency to put in the memory Press the [a] or [d] button.

3.Put the frequency in the memory

Press the [PRESET] button for at least 2 sec- onds.

The preset number display blinks 1 time.

On each band, 1 station can be put in the memory on each [PRESET] button.

Auto Store Entry

Putting a station with good reception in the memory automatically.

1.Select the band for Auto Store Entry Press the [FM] or [AM] button.

2.Open Auto Store Entry

Press the [T-M] button for at least 2 seconds.

When 6 stations that can be received are put in the memory Auto Store Entry closes.

Preset Tuning

Calling up the stations in the memory.

1.Select the band

Press the [FM] or [AM] button.

2.Call up the station

Press the [PRESET] button.

Changing the reception area

This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below.

●Setting the reception area

1.If the Reset button is pressed while pressing [PRESET 1] and [PRESET 5], reception area will switches from inside the USA to outside the USA or from outside the USA to inside the USA.

∗Any station preset memories are lost when the reception area is changed.

CRSC (Clean Reception System Circuit) <In FM reception>

Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station.

Display Setting

“CRSC ON” The CRSC is ON.

“CRSC OFF” The CRSC is OFF.

Note:

•Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.

16 DB625MP