TV Operations
TV Operations
TV tuner functions
Manual tuning
Auto store | Setting the TV area |
English
When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor.
Watching a TV
1.Press the [FNC] button and select the TV mode.
2.Press the [BND] button to select the desired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles between TV1 and TV2.
3.Press the [a] or [d] button to tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12 V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal.
1. Press the [ |
| ] button to select VTR. |
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.
1.Press the [BND] button and select the desired band (TV1 or TV2).
∗If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” lights in the display and manual tuning is now available.
2.Tune in a station.
●Quick tuning:
Press and hold the [a] or [d] button for 1 second or longer to tune in a station.
●Step tuning:
Press the [a] or [d] button to manually tune in a station.
Recalling a preset station
A total of 12 TV stations can be stored
Auto store selects 6 TV stations automatically and stores each one into preset memory.
If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory.
1.Press the [BND] button and select the desired TV band (TV1 or TV2).
2.Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
Preset scan
Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for a desired TV station in memory.
1.Press the [P/A] button.
2.When the desired station is found, press the [P/A] button again to remain tuned to that station.
When you select the TV area (TV reception area), the TV tuner area setting changes.
1.Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “TV AREA”.
3.Press the [
] button.
4.Turn the [ROTARY] knob clockwise or counterclockwise to select the reception area.
5.Press the [
] button.
6.Press the [TITLE] button to return to the previous mode.
The above operations are required when a TV tuner other than TTX7501z is connected.
English
2. To return to the TV broadcast, press the | |
[ | ] button. |
Tuning
There are 3 types of tuning mode available, Seek tuning, manual tuning and preset tuning.
Seek tuning
1.Press the [BND] button and select the desired TV band (TV1 or TV2).
∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.
2.Press the [a] or [d] button to automatically seek a station. Press the [d] button to automatically tune up the frequency band to the next available TV station; press the [a] button to automatically tune down.
and
1.Press the [BND] button and select the desired TV band (TV1 or TV2).
2.To recall a stored TV station, press the desired [DIRECT] button to select that station.
∗Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.
Manual memory
1.Select the desired station with seek tuning, manual tuning or preset tuning.
2.Press and hold one of [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.
Note:
•Do not press and hold the [P/A] button for 2 seconds or longer. Doing so will trigger the auto store function and start storing stations into memory.
Setting the TV diver
You can change the reception setting for the TV antenna connected to the TV tuner.
1.Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “TV DIVER”.
3.Turn the [ROTARY] knob clockwise to set to “ON” or counterclockwise to set to “OFF”.
● ON:
Sets reception emphasizing the visual.
●OFF:
Sets the diver setting to OFF.
4.Press the [TITLE] button to return to the previous mode.
22 | DXZ435 | DXZ435 | 23 |
