5. DCP
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.
We recommend taking the DCP with you when leaving the car.
Removing the DCP
1.Press the [FNC] button for 1 second or longer to switch off the power.
2.Press in the [RELEASE] button.
[RELEASE] button
∗ The DCP is unlocked
3.Remove the DCP.
DCP
Attaching the DCP
1.Insert the right side of the DCP into the main unit.
2.Insert the left side of the DCP into the main unit.
2.
DCP 
1.
Storing the DCP in the DCP Case | English |
| |
Hold the DCP, in the orientation as shown in the |
|
figure below, and put it into the supplied DCP |
|
case. (Ensure the DCP is in the correct |
|
orientation.) |
|
DCP |
|
DCP case 
CAUTION
•The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks.
•When the Release button is pressed and the DCP is unlocked, the car’s vibrations may cause it to fall. To prevent damage to the DCP, always store it in its case after detaching it. (ee figure below.)
•The connector connecting the main unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc.
DCP Rear Panel | Main Unit Front |
DCP connector
Main unit connector
Note:
•If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.
DXZ435 9
