Clarion DXZ435 owner manual Basic Operations, English

7. OPERATIONS

Basic Operations

English

Basic Operations	Note: Be sure to read this chapter referring to the front diagrams of
	chapter “3. CONTROLS” on page 5 (unfold).

“Z+ OFF” ➜ “B-BOOST” ➜ “IMPACT” ➜

“EXCITE” ➜ “CUSTOM” ➜ “Z+ OFF” ...

• B-BOOST : bass emphasized

∗ The factory default setting is “B<Q 1>”.

(Adjustment 1/1.25/1.5/2)

5. When the adjustment is complete, press the

[A-M] button several times until the function

English

CAUTION

Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.

Adjusting the volume

Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.

∗The volume level is from 0 (minimum) to 33 (maximum).

Switching the display

• IMPACT	: bass and treble
	emphasized
• EXCITE	: bass and treble
	emphasized mid de-
	emphasized
• CUSTOM	: user custom
• Z+ OFF	: no sound effect

mode is reached.

Adjusting the treble (Gain, Frequency)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1. Press the [A-M] button and select “TREBLE”.

Turning on/off the power

Note:

•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1.Press the [FNC] button.

2.The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.

3.Press and hold the [FNC] button for 1 second or longer to turn off the power for the unit.

Note:

•System check

The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, “SYSTEM” and “PUSH PWR” appear in the display alternately, so press the [FNC] button. The system check starts within the unit. When the system check is complete, press the [FNC] button again.

Selecting a mode

1.Press the [FNC] button to change the operation mode.

2.Each time you press the [FNC] button, the operation mode changes in the following order:

Radio mode ➜ CD mode ➜ CD changer mode ➜ MD changer mode ➜ DVD changer mode ➜ TV mode ➜ AUX mode ➜ Radio mode...

∗External equipment not connected with CeNET is not displayed.

Press the [DISP] button to select the desired display.

Each time you press the [DISP] button, the display switches in the following order:

Main display

Sub display

Clock display

Main display

∗Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display several seconds after the adjustment.

∗When you have entered a title in a CD, it appears in the sub display. If you have not entered a title, “NO TITLE” appears in the title display instead. For information on how to enter a title, refer to the subsection “Entering titles” in section “Operations Common to Each Mode”.

Setting the Z-Enhancer Plus

This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “Z+ OFF”.

Adjusting the tone

Press the [A-M] button and select the item to adjust. Each time you press the [A-M] button, the item changes as following order:

●When “B-BOOST” is set

“B-BOOST” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

●When “IMPACT” is set

“IMPACT” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

●When “EXCITE” is set

“EXCITE” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

●When “CUSTOM” is set

“BASS” ➜ “TREBLE” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

●When “Z+ OFF” is set

“BAL 0” ➜ “FAD 0” ➜ Last function mode.

Adjusting the bass (Gain,

Frequency, Q-curve)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.	Press the [A-M] button and select “BASS”.
2.	Turning the [ROTARY] knob clockwise
	emphasizes the bass; turning it
	counterclockwise attenuates the bass.
	∗ The factory default setting is “B<G 0>”.
	(Adjustment range: –6 to +6)
3.	Press the [d] or [a] button to select “B<F
	60>”.
	Turninng the [ROTARY] knob clockwise or
	counterclockwise to select the frequency.
	∗ The factory default setting is “B<F 60>”.
	(Adjustment 60/100/200 Hz)
4.	Press the [d] or [a] button to select “B<Q 1>”.

2.Turning the [ROTARY] knob clockwise emphasizes the treble; turning it counterclockwise attenuates the treble.

∗The factory default setting is “T<G 0>”. (Adjustment range: –6 to +6)

3.Press the [d] or [a] button to select “T<F 10>”.

Turninng the [ROTARY] knob clockwise or counterclockwise to select the frequency.

∗The factory default setting is “T<F 10>”. (Adjustment 10 kHz/15 kHz)

4.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the balance

1.Press the [A-M] button and select “BAL 0”.

2.Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “BAL 0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.	Press the [A-M] button and select “FAD 0”.
2.	Turning the [ROTARY] knob clockwise
	emphasizes the sound from the front
	speakers; turning it counterclockwise
	emphasizes the sound from the rear
	speakers.
	∗ The factory default setting is “FAD 0”.
	(Adjustment range: F12 to R12)
3.	When the adjustment is complete, press the
	[A-M] button several times until the function

Each time you press the [Z+] button, the tone effect changes in the following order:

Turninng the [ROTARY] knob clockwise or

counterclockwise to select the Q-curve.

mode is reached.

12 DXZ435 DXZ435 13