STD mode/DSF operations

AC Processor Operations

G.EQ effect ON/OFF

	AC Processor Operations
Editing/storing a sound field menu	Selecting an VSE menu

While the “G.EQ” indication ~ is lit in the dis- play, the G.EQ effect is set to “ON”.

∗The factory default setting is “ON”.

1.Press A-M button $ and select “G.EQ”.

2.Press DISP button #.

3.Press A-M button $. “G.EQ” in the display lit or unlit.

∗When “G.EQ” is unlit, the G.EQ effect is set to OFF.

Note:

•If the G.EQ effect is set to OFF, the adjustment made in “G.EQ operations” is not reflected in the music source.

Selecting a G.EQ menu

DSF effect ON/OFF

When the “DSF” indication 5 is lit in the display, the DSP effect is set to “ON”.

∗The factory default setting is “ON”.

1.Press A-M button $ and select “DSF”.

2.Press DISP button #.

3.Press A-M button $. “DSF” in the display lit or unlit.

∗When “DSF” is unlit, the DSF effect is set to OFF.

Note:

• If the DSF effect is set to OFF, the adjustment made in “DSF operations” is not reflected in the music source.

(User memory)		1.	Press A-M button $ and select “VSE”.
1.	Select a sound field menu which you want to	2.	Press BND button " to select “BASC” (ba-
	edit on the basis of.		sic). “BASC” is displayed in the operation
2.	Press and hold ADJ button 2 for 1 second or		status indication - in the display.
	longer.	3.	Press one of Direct buttons 9 and select the
3.	Press the right or left side of SEARCH button		desired VSE menu.
	% to select the item to be adjusted.		∗ To select the user memory, press BND button
	There are “EFFECT”, “DELAY”, “REAR MIX”,		" to select “USR” and press one of Direct
	“REV.TIME” or “ROOM SIZE” and “HIGH” or		buttons 9.
	“REV.TIME” or “ROOM SIZE” and “HIGH” or
	“LIVENESS” available for the items to be ad-	Editing/storing an VSE menu (User
	justed.	Editing/storing an VSE menu (User
	∗ For details on each adjustment item, refer to the	memory)
	∗ For details on each adjustment item, refer to the	1.	Select an VSE menu which you want to edit
	owner’s manual supplied with the DPH910.	1.	Select an VSE menu which you want to edit
4.	Turn the Rotary knob ( clockwise or coun-		on the basis of.
	terclockwise to make the adjustment.	2.	Press and hold ADJ button 2 for 1 second or

1.Press A-M button $ and select “G.EQ”.

2.Press BND button " to select “BASC” (ba- sic). “BASC” is displayed in the operation status indication - in the display.

3.Press one of Direct buttons 9 and select the desired G.EQ menu.

∗ To select the user memory, press BND button " to select “USR” and press one of Direct buttons 9.

Setting the listening position menu

1.Press A-M button $ and select “DSF”.

2.Press the right or left side of SEARCH button % to set the listening position type.

There are FULL SEAT, FRONT-R, FRONT-L, FRONT (only front seats), REAR (only rear seats) and PASS available for the listening position types.

∗The factory default setting is “FULL SEAT”.

5.	Repeat steps 3 to 4 to complete the adjust-	longer.
	ment and press ADJ button 2.	3. Press the right or left side of SEARCH button
6.	Press and hold one of Direct buttons 9 for 2	% to select the item to be adjusted.
	seconds or longer to store the edited contents.	There are “DIFFUSE”, “CAR WIDTH” and “CAR
	∗ You can give a title to the user memory. For	LENG” available for the items to be adjusted.
	the inputting method of titles, refer to the	∗ For details on each adjustment item, refer to the
	subsection “Entering titles” in section “Opera-	owner’s manual supplied with the DPH910.
	tions common to each mode”.	owner’s manual supplied with the DPH910.
	tions common to each mode”.	4. Turn the Rotary knob ( clockwise or counter-
		4. Turn the Rotary knob ( clockwise or counter-
Professional mode/VSE operations		clockwise to make the adjustment. The adjust-
Professional mode/VSE operations		ment range is from 1 to 10 for each item.

Editing/storing a G.EQ menu (User memory)

1.Select a G.EQ menu which you want to edit on the basis of.

2.Press and hold ADJ button 2 for 1 second or longer.

3.Press the right or left side of SEARCH button % to select the frequency to be adjusted. There are 50Hz, 100Hz, 200Hz, 400Hz, 1kHz, 3kHz and 12kHz available for the adjustment

frequency.

∗ For details on each adjustment item, refer to the owner’s manual supplied with the DPH910.

4.Turn the Rotary knob ( clockwise or counter- clockwise to make the adjustment. The adjust- ment range is from –6 to 6.

5.Repeat steps 3 to 4 to complete the adjust- ment and press ADJ button 2.

6.Press and hold one of Direct buttons 9 for 2 seconds or longer to store the edited contents.

∗ You can give a title to the user memory. For the inputting method of titles, refer to the subsection “Entering titles” in section “Opera- tions common to each mode”.

Making fine adjustment of the listening position

1.Upon completion of setting the listening position, press ENT button &.

2.Press the right or left side of SEARCH button % to select “BALANCE” or “FADER”. The selected item blinks.

3.Turn the Rotary knob ( clockwise or counter- clockwise to adjust the balance and the fader.

4.Press ENT button & to return to the DSF mode.

Selecting a sound field menu

1.Press A-M button $ and select “DSF”. “DSF” blinks in the display.

2.Press BND button " to select “BSC1” (ba- sic-1) or “BSC2” (basic-2). “BSC1” or “BSC2” is displayed in the operation status indication

-in the display.

3.Press one of Direct buttons 9 and select the desired sound field menu.

∗ To select the user memory, press BND button

"to select “USR” and press one of Direct buttons 9.

	Note:	5. Repeat steps 3 to 4 to complete the adjust-
	Note:	ment and press ADJ button 2.
	• The adjustment made in professional mode is not	6. Press and hold one of Direct buttons 9 for 2
	reflected in the adjustment in standard mode. On	6. Press and hold one of Direct buttons 9 for 2
	reflected in the adjustment in standard mode. On	seconds or longer to store the edited contents.
	the contrary, the adjustment made in standard	seconds or longer to store the edited contents.
	the contrary, the adjustment made in standard	∗ You can give a title to the user memory. For
	mode is not reflected in the adjustment in	∗ You can give a title to the user memory. For
	professional mode.	the inputting method of titles, refer to the
		subsection “Entering titles” in section “Opera-
	VSE effect ON/OFF	tions common to each mode”.
	VSE effect ON/OFF
	While the “VSE” indication 4 is lit in the display,	Professional mode/P.EQ operations
	the VSE effect is set to “ON”.	Professional mode/P.EQ operations

∗The factory default setting is “ON”.

1.	Press A-M button $ and select “VSE”.	P.EQ effect ON/OFF
2.	Press DISP button #.	While the “P.EQ” indication ( is lit in the dis-
3.	Press A-M button $. “VSE” in the display lit	play, the P.EQ effect is set to “ON”.
		∗ The factory default setting is “ON”.
	or unlit.
		1.	Press A-M button $ and select “P.EQ”.
	∗ When “VSE” is unlit, the VSE effect is set to
		2.	Press DISP button #.
	OFF.
Note:		3.	Press A-M button $. “P.EQ” in the display is
• If the VSE effect is set to OFF, the adjustment			changed from blinking to lit or unlit.
made in “VSE operations” is not reflected in the			∗ When “P.EQ” is unlit, the P.EQ effect is set to OFF.
music source.
		Note:

• If the P.EQ effect is set to OFF, the adjustment made in “P.EQ operations” is not reflected in the music source.

24 DXZ715/HX-D10

DXZ715/HX-D10 25

Clarion DXZ715 owner manual STD mode/DSF operations

Models: DXZ715