Basic Operations
Radio Operations
2.Press the SEARCH button % and select from
“TREB 
GAIN 
” ➜ “TREB 
F 12K ” ➜ “TREB 
GAIN ”.
3.Turn the Rotary knob ( clockwise or coun- terclockwise as needed and adjust the gain and the F (center frequency).
TREB GAIN :
TREB F : 8KHz/12KHz (The Factory default setting is “12K”)
4.When the adjustment is complete, press
Adjusting the balance
1.Press
2.Turning the Rotary knob ( clockwise empha- sizes the sound from the right speaker; turn- ing it counterclockwise emphasizes the sound from the left speaker.
∗The factory default setting is “0”. (Adjustment range: L13 to R13)
3.When the adjustment is complete, press
4.When the adjustment is complete, press
Turning on/off the loudness
The loudness effect emphasizes the bass and treble to create a natural sound tone. When you are listening to music at a low volume, it is rec- ommended to use the loudness effect.
1.Press and hold LOUD button $ for 1 second or longer to turn on the loudness effect. When the loudness effect is turned on, “LD” lights in the display.
2.Press and hold LOUD button $ for 1 second or longer to turn off the loudness effect. “LD” goes off in the display.
Note:
•When using a sold separately digital sound pro- cessor (DPH910), a feature called auto loudness is selected. This function is different from the loud- ness effect. For further details on the auto loud- ness feature, refer to the subsection “Output ad- justment of auto loudness, subwoofer and playback band” in section “AC Processer Operations”.
FM Reception
For enhanced FM performance the 
tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.
Changing the reception area
This unit is initially set to USA frequency intervals of 10 kHz for AM and 200 kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below.
●Setting the reception area
1.Press BND button " and select the desired radio band (FM or AM).
2.While pressing DISP button #, each time you press and hold the number “6” of the Preset buttons 9 for 2 seconds or longer, the recep- tion area switches from inside the USA to outside the USA or from outside the USA to inside the USA.
∗Any station preset memories are lost when the reception area is changed.
Listening to the radio
1. Press FUNCTION button 3 and select the |
radio mode. The frequency is displayed. |
Manual tuning
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the fre- quency changes one step at a time. In quick tun- ing mode, you can quickly tune the desired fre- quency.
1.Press BND button " and select the desired band (FM or AM).
∗If “MANU” is not lit in the display, press and hold BND button " for 1 second or longer. “MANU” is lit in the display and manual tuning is now available.
2.Tune into a station.
●Quick tuning:
Press and hold the right or left side of SEARCH button % for 1 second or longer to tune in a station.
●Step tuning:
Press the right or left side of SEARCH button
%to manually tune in a station.
Recalling a preset station
A total of 24 preset positions |
FM3, |
tions in memory. Pressing the corresponding pre- |
Adjusting the fader
1.Press
2.Turning the Rotary knob ( clockwise empha- sizes the sound from the front speakers; turn- ing it counterclockwise emphasizes the sound from the rear speakers.
∗The factory default setting is “0”. (Adjustment range: F12 to R12)
3.When the adjustment is complete, press
Adjusting the Beat EQ
1.Press BEQ button 8 and select the Beat EQ mode (1 to 3) to adjust.
2.Press
3.Turning the Rotary knob ( clockwise adjusts in the + direction; turning it counterclockwise adjusts in the – direction.
∗When BASS BOOST is selected, you can ad- just the bass in the range of
∗When IMPACT and EXCITE is selected, you can adjust the bass and treble in the range of
2. | Press BAND button " and select the radio |
| band. Each time the button is pressed, the radio |
| reception band changes in the following order: |
| FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1... |
3. | Press the right or left side of SEARCH button |
| % to tune in the desired station. |
Tuning
There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
Seek tuning
1.Press BAND button " and select the desired band. (FM or AM)
∗If “MANU” is lit in the display, press and hold BAND button " for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.
2.Press the right or left side of SEARCH button % to automatically seek a station.
When the right side of SEARCH button % is pressed, the station is sought in the direction of higher frequencies; if the left side of SEARCH button % is pressed, the station is sought in the direction of lower frequencies.
set button recalls the stored radio frequency au- |
tomatically. |
1.Press BND button " and select the desired band (FM or AM).
2.Press the corresponding Preset button 9 to recall the stored station.
∗Press and hold one of Preset buttons 9 for 2 seconds or longer to store that station into pre- set memory.
Manual memory
1.Select the desired station with seek tuning, manual tuning or preset tuning.
2.Press and hold one of Preset buttons 9 for 2 seconds or longer to store the current station into preset memory.
Auto store
Auto store is a function for storing up to 6 sta- tions that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a pre- viously stored station remains unoverwritten at the memory position.
1.Press BND button " and select the desired band (FM or AM).
12 |
