3. CONTROLS / LES COMMANDES / CONTROLES
Source unit / Appareil pilote / Unidad fuente
4. NOMENCLATURE
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
Names of Buttons
5. DCP
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.
We recommend taking the DCP with you when leaving the car.
1RELEAS button
2TITLE button
ADJ (adjust) button
3Power button
FNC (function) button
4OPEN button EJECT button
5PS/AS (preset scan/auto store) button SCN (scan) button
6RPT (repeat) button
7RDM (random) button
8BEQ(Beat EQ) Button
!ISR button
"BND (band) button TOP button
#DISP (display) button
$ LOUD (loudness) button
%SEARCH button
&Play/pause button ENT (enter) button
( Rotary knob
) CD insertion slot
Removing the DCP
1.With the SLOPING CONSOLE closed, turn off the power.
2.Press the RELEASE button 1 deeply to open the DCP.
RELEASE button 1
Attaching the DCP
1.Insert the DCP so that the A section on the right side of the DCP catches on the hook B on the unit.
With the SLOPING CONSOLE opened / Avec la CONSOLE INCLINABLE ouverte / con la consola SLOPING CONSOLE abierta
Display / Afficheur / Visualizador
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
9Preset button (1 to 6)
Direct button (1 to 6) (7 to 12)
Display Items (Function mode)
1 | Operation status indication | % Disc indication |
| *Title, clock, etc. are displayed. | & Scan indication |
2 | BEQ indication (BEQ: Beat EQ) | ( Parametric egualizer indication |
3 | Professional mode indication | ) Repeat indication |
4 | VSE indication (VSE:Virtual Space Enhancer) | ~ Graphic egualizer indication |
5 | DSF indication (DSF: Digital Sound Field) | + Random indication |
6 | STD mode indication (STD: Standard) | , Manual indication |
7 | DAB indication | - Operation status indication |
8 | Alternative freguency indication | *The frequency, play time, etc. |
9 | Traffic announcement indication | . Preset channel indication (1 to 6) |
! Traffic programme indication | Disc number indication (1 to 12) | |
" Programme type indication | / Stereo indication | |
# Infomation indication | : Loudness indication | |
$ Clock (Clock indication) etc. |
| |
| (A mode, FADER, BALANCE, etc. indications) |
|
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is nor- mal. The screen will recover when it returns to normal temperature.
3. Pull the DCP toward you and remove it.
DCP
CAUTION
•Always close the SLOPING CONSOLE be- fore removing the DCP.
•If you remove the DCP with the SLOPING CONSOLE open, the sloping console closes immediately. Be careful not to get your fin- gers caught.
2.Press the left side of the DCP carefully to fit it in place.
CAUTION
•The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks.
•If the RELEASE button 1 is pressed and the DCP is not locked into place, it may fall out from vibration of the car. This can break the DCP, so after removing it, either install it on the unit or put it in its DCP case.
•The connector connecting the unit and the DCP is an extremely important part. Be care- ful not to damage it by pressing on it with fingernails, screwdrivers, etc.
Note:
•If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.
5 | 6 |
| 7 | |||
|
|
|
|
|
|
|
