AC-Processor II Operation
Distributing the center channel sound to the right and left will increase the integrated sound field image, providing you with an natural spatial feeling of sound.
Setting to the value 0 will produce the center sound with the center speaker.
Setting to the value 7 will distribute the center sound to the front speaker L/R as the existing stereo sound does.
Adjusting AC-PII STD
VSE, which is room simulation, can correct the sound pressure inside the car so that the uniform sound effect is obtained at any seats.
1.Select “VSE” menu which you want to edit on the basis of.
2.Press and hold the [TITLE] button for 1 sec- ond or longer.
English
There are 2 modes “STD” (standard) and “PRO” (professional) in the
1.Setting the speaker to 4ch+2ch (For details, refer to the subsection “Speaker Setting” in the section “Basic Operations”).
2.Turn off the PLII mode.
3.Press and hold the [TITLE] button for 1 sec- ond or longer and enter “ADJ” mode.
4.Press the [a] or [d] button to select the
5.Press the [
] button to select
6.Turn the [ROTARY] knob clockwise or coun- terclockwise to select “STD” or “PRO”.
7.Press the [TITLE] button to the previous mode.
Operation AC-PII STD
1.Press the [VSE] button to enter VSE mode.
2.Press the [BND] button to select “VSE BASIC”.
3.Press the [DIRECT] button to select VSE menu as below.
1.Flat: original sound, flat equalizing
2.Bass boost: deep bass sound empha- sized
3.High boost: middle and high sound area emphasized
4.Impact: low and high sound area em- phasized
5.Acoustical: middle sound area empha- sized (human voice)
6.Smooth: quiet and graceful feeling
4.Press the [VSE] button to return to the previ- ous mode.
5.Press and hold the [VSE] button for 1 second or longer so that the VSE effect is turned on or off.
3.Press the [a] or [d] button to select item to be adjusted.
There are “DIFFUSE” “CAR WIDTH” and “CAR LENG” available for the items to be adjusted.
DIFFUSE (Adjusts the correction deviation of broadness)
CAR WIDTH (Adjusts the correction deviation of width inside the car)
CAR LENG (Adjusts the correction deviation of length inside the car)
4.Turn the [ROTARY] knob clockwise or coun- terclockwise to make the adjustment.
The adjustment range is from 1 to 10 for each item.
5.Press and hold the [DIRECT] buttons for 2 seconds or longer to store the edited con- tents.
∗You can give a title to user memory. For the in- putting method of titles, refer to the subsection “Entering titles” in section “Operations com- mon to each mode”.
Operation AC-PII PRO
Arrival time of sound from the speaker can be selected from among five types according to the position of the seat. In addition, Time Alignment Function enables a pinpoint speaker setting to obtain a uniform sound effect from speakers to the listner.
1.Press the [VSE] button to enter POSITION mode.
2.Press the Band button to select “POS BASIC”.
3.Press the [DIRECT] button to select VSE menu as below.
4.Press the [VSE] button to return to the previ- ous mode.
DXZ938R 15