AC-Processor II Operation

English

5.Press and hold the [VSE] button for 1 second or longer so that the POSITION effect is turned on or off.

Adjusting AC-PIIPRO

1.Select “VSE” menu which you want to edit on the basis of.

2.Press and hold the [TITLE] button for 1 sec- ond or longer.

3.Press the [a] or [d] button to select item to be adjusted.

∗There are “TIME ALIGN” and “SP GAIN” avail- able for the items to be adjusted.

4.Press the [ ].

5.Press the [a] or [d] button to select the channel to be adjusted. Available channels are: “FRONT-L”,“FRONT-R”,“REAR-L”,“REAR-R”,“SW-L” and “SW-R”.

6.Turn the [ROTARY] knob clockwise or coun- terclockwise to make the adjustment.

The adjustment of “TIME ALIGN” range is from 0 cm to 500cm.

The adjustment of “SP-GAIN” range is from 0db to -20dB for each channel.

7.Press and hold the [DIRECT] buttons for 2 seconds or longer to store the edited con- tents.

∗You can give a title to user memory. For the in- putting method of titles, refer to the subsection “Entering titles” in section “Operations com- mon to each mode”.

EQ Operation

There are 2 mode for sound EQ “P.EQ” mode and “BASS/TREB” mode selecting EQUALIZING mode.

1.Press and hold the [TITLE] button for 1 sec- ond or longer and enter “ADJ” mode.

2.Press the [a] or [d] button to select the “AC-PIISEL”.

3.Press the [ ] button to enter AC-PROIIselect mode “STD” or “PRO”.

4.Then press the [a] or [d] button to select the “EQ SEL”.

5.Turn the [ROTARY] knob clockwise or coun- terclockwise to select “P.EQ” or “BAS/TREB” mode.

6.Press the [TITLE] button to return to the pre- vious mode.

Operation P.EQ

A full range of frequency level can be minutely corrected with a smooth curve by frequency correction in accordance with car models. Six kinds of P.EQ basic menus have been pre-stored in this unit according to the car models and the mounting positions of speakers. Thus, set it in accordance with the car type.

1.Press the [EQ] button to enter “P.EQ mode”.

2.Press the Band button to select “P.EQ BA- SIC”.

3.Press the [DIRECT] button to select P.EQ menu as below.

1.SEDAN-1 2.SEDAN-2 3.WAGON-1 4.WAGON-2 5.MINI VAN-1 6.MINI VAN-2

4.Press the [EQ] button to return to the previ- ous mode.

5.Press and hold the [EQ] button for 1 second or longer so that the P.EQ effect is turned on or off.

Adjusting P.EQ

1.Select “P.EQ” menu which you want to edit on the basis of.

2.Press and hold the [TITLE] button for 1 sec- ond or longer.

3.Press the [a] or [d] button to select item to be adjusted.

There are “FRONT/REAR” ,“BAND” ,“FREQ” “GAIN” and “Q” available for the items ad- justed.

4.Press and hold the [DIRECT] buttons for 2 seconds or longer to store the edited con- tents.

∗You can give a title to user memory. For the in- putting method of titles, refer to the subsection “Entering titles” in section “Operations com- mon to each mode”.

∗The parameter created in this section is also effective when the unit is in both the “STD” and “PRO” mode.

∗Factory default setting is P.EQ

16 DXZ938R