Clarion DXZ938R Digital Radio / DAB Operations, Switching programmes, Programme scan, Recalling a preset programme, AF function, Manual memory, TA (Traffic Announcement)

Digital Radio / DAB Operations

Switching programmes

1.Press the [FNC] button to receive a DAB station.

2.Press the [a] or [d] button to switch programmes in the DAB station.

Note:

•The programme name may be the same depend- ing on DAB programmes.

3.Press one of the [DIRECT] buttons to recall a preset programme.

Note:

•Press and hold the [DIRECT] button for 2 sec- onds or longer to store the programme currently being received. (Manual memory)

AF function

English

Programme scan

This function scans through each receivable programme in a DAB station being received for 10 seconds sequentially. This is useful when you want to search for a desired programme.

1.Press the [FNC] button to receive a DAB station.

2.Perform the following operation depending on the connected model.

Press the [P/A] button. “SERVICE SCN” lights up and the unit starts scanning each programme for 10 seconds sequentially. Each time the main unit scans, the programme name is shown in the display.

3.To stop programme scan when a desired programme is tuned in.

Press the [P/A] button.

The AF function switches to a different frequency on the same network in order to maintain optimum reception.

∗The factory default setting is “ON”

∗If the reception of the current broadcast station de- teriorates, “SEARCH ” appears in the display and the radio searches for the same programme on another frequency.

∗For details on “AF function”, refer to the section “RDS operation” of each owner’s manual.

●Switching OFF the AF function

●Switching ON the AF function

●AF function between RDS and DAB

When the same programme is broadcast by both RDS and DAB, and this function is ON, the main unit switches to receiving the broadcast with the better reception automatically.

Manual memory

The main unit has a manual memory function for DAB programmes. Up to 18 programmes (6 programmes each) can be preset in the preset buttons.

[M1], [M2] and [M3]

1.Press the [FNC] button to select the DAB mode.

2.Press the [BND] button to select any one shown above.

3.Press the [a] or [d] button to select a de- sired programme.

4.Press and hold one of the [DIRECT] buttons (1 to 6) for 2 seconds or longer to store the programme.

Note:

•The interrupt programme (PTY or INFO) cannot be written into a manual memory.

Recalling a preset programme

1.Press the [FNC] button to select the DAB mode.

2.Press the [BND] button. Each time you press the [BND] button, the display changes in the following order:

[M1] ➜ [M2] ➜ [M3] ➜ [M1]...

TA (Traffic Announcement)

In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode. Traffic programme (TP) automatic tuning is also possible.

∗This function can only be used when “TP” is lit in the display. When “TP” is lit, this means that the DAB or RDS broadcast station being received has traffic announcement programmes.

∗For details on “TA”, refer to the section “RDS op- eration” of each owner’s manual.

●Setting the TA standby mode

●Cancelling the TA standby mode

●Searching for a TP station

Notes:

•If a TP station is not received, the main unit stops the search operation.

•“TP” may be lit in the display when a TP broad- cast is transmitted from an RDS station. In this case, press the [TA] button to perform TP seek tuning. Press the [TA] button again to return to the previous mode.

DXZ938R 31