Clarion DXZ938R RDS Operations, REG (Regional programme) function, Manually tuning a regional station in the same network, TA (Traffic Announcement)

RDS Operations

1.Press and hold the [TITLE] button for 1 sec- ond or longer to switch to the adjustment se- lection display.

2.Press the [a] or [d] button to select “LINK ACT”.

3.Turn the [ROTARY] knob clockwise for “ON” or counterclockwise for “OFF”.

●ON:

AF switching between DAB and RDS enabled.

●OFF:

AF switching between DAB and RDS disabled.

4.Press the [TITLE] button to return to the pre- vious mode.

REG (Regional programme) function

When the REG function is ON, the optimum regional station can be received. When this function is OFF, if the regional station area switches as you drive, a regional station for that region is received.

∗The factory default setting is “OFF”.

Notes:

•This function is disabled when a national station such as BBC R2 is being received.

•The REG function ON/OFF setting is valid when the AF function is ON.

●Switching the REG function ON

Press and hold the [AF] button for 1 second or longer.

“REG” in the display lights and the REG function turns on.

●Switching the REG function OFF

Press and hold the [AF] button for 1 second or longer.

“REG” in the display goes off and the REG function turns off.

Manually tuning a regional station in the same network

1.This function is valid when the AF function is ON and the REG function is OFF.

TA (Traffic Announcement)

In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it.Traffic programme (TP) automatic tuning is also possible.

∗This function can only be used when “TP” is lit in the display. When “TP” is lit, this means that the RDS broadcast station being received has traffic announcement programmes.

●Setting the TA standby mode

If you press the [TA] button when only “TP” is lit in the display, “TP” and “TA” light in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, “TRA INFO” appears in the display. If you press the [TA] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode.

●Cancelling the TA standby mode

With “TP” and “TA” lit in the display, press the

[TA] button. The “TA” in the display goes off and the TA standby mode is cancelled.

∗If “TP” is not lit, pressing the [TA] button searches for a TP station.

●Searching for a TP station

When “TP” is not lit, if you press the [TA] button, “TA” in the display lights and the unit automatically receives a TP station.

Note:

•If a TP station is not received, the unit continues the search operation. Pressing [TA] button again goes off “TA” in the display and stops TP station searching.

Auto store function for TP stations

You can automatically store up to 6 TP stations into preset memory. If the number of TP that can be received is less than 6, broadcast stations already stored in memory are left without being overwritten.

With “TA” lit in the display, press and hold the [P/A] button for 2 seconds or longer.The TP stations with the good reception sensitivity are stored into preset memory.

English

Note:

•This function can be used when a regional broad- cast of the same network is received.

2.Press any one of the [DIRECT] buttons to call out the regional station.

3.If the reception condition of the called out station is bad, press the [DIRECT] button of the same number. The unit receives a local station on the same network.

∗Even if you select FM1 or FM2, a TP station is stored into memory for FM3.

DXZ938R 19