4.Touch your desired Cellular button to select the button for the cellular phone to

be registered, and touch[] button to register for the Bluetooth cellular phone.

•You cannot select the Cellular button of which another cellular phone is already registered. Select a blank Cellular button.

5.If entering the Pass Key code is prompted on your cellular phone, enter the Pass Key code set in this unit.

•You can change the Pass key setting of this unit from the Bluetooth Info screen under the Telephone Settings screen.

When the pairing operation completes, the registered cellular phone is set as the current telephone, and the display returns to the Telephone screen.

• To delete the cellular phone registration

1.Touch the [] button to delete the device. A confirmation screen is displayed.

2.Touch the [] button to confirm delete.

Select the Cellular Phone

To change the current cellular phone to the other device which is already registered, perform the following operation.

1.Touch the [] button to display the Device Select screen.

2.Touch the currently connected device, then touch

[] button to disconnect the active device.

3.Touch the desired Device button you wish to use. Touch [] button to select it as your active device. The corresponding cellular phone is set as the current telephone.

• If the power of the cellular phone is not turned on, turn it on.

•The cellular phone may prompt to acknowledge the Bluetooth connection or to enter the Pass Key code of this unit. Perform these operations according to the message displayed.

4. Touch the [] button to return to the previous screen.

Obtaining the Phone Book Data

Sending the Phone Book data from the cellular phone enables you to make a call using the Phone Book function from this unit.

Telephone OperationsMaking a call using the Ten-Key pad

1.Touch the [] button to display the Ten-Key pad screen.

2.Enter the telephone number by using the Ten-Key pad displayed on the screen.

English

guide start Quick

NX40421