Symbol Identification

This manual uses symbols and icons to indicate safety precautions and concerns during the installation procedure. Be sure to carefully read and understand each precaution prior to beginning the installation.

WARNING

This symbol is intended to alert the user to the presence of important operating instructions. Failure to heed the instructions may result in severe injury or death.

CAUTION

This symbol is intended to alert the user to the presence of important operating instructions. Failure to heed the instructions can result in injury or material damage.

WARNING

•Confirm the battery voltage of the vehicle to be installed. This unit is designed only for vehicles with DC 12V power supply.

•Disconnect the negative terminal of the battery before connecting wires, otherwise an electric shock, injury by short circuit may occur.

Installation Precautions

WARNING

•When installing the unit to a vehicle with an airbag system, never install it in a place where it may affect the operation of the airbag.

•Do not install this unit in the following locations:

A location interfering with the driver’s visual range or operation. A location where the gear shift or brake pedal are hindered.

A location where passengers are at risk.An unstable location, or where the system may fall.

CAUTION

•Do not install the system in the locations described below. This may cause a fire, accident or electrical shock:

A location exposed to rain or dust.

An unstable location, or where the system may fall.

•Do not install this unit in a place exposed to direct sunlight, heat or a place where the vent holes or heat radiation holes are covered.

•When you install the antenna, mount it in a place where the elements of the antenna do not protrude beyond the edge of the front, back, left and right of the vehicle. If it comes in contact with pedestrians, it may cause an accident.

English

guide start Quick

NX40425