Yellow

Black

Purple

Purple/Black Red

Gray

Connect directly +12V to battery

Ground

Rear right +

Rear right -

+12V accessory

Front right +

Connecting the parking brake cord

Connect the cord to parking brake lamp ground in the meter panel.

Note:

•Connecting the parking brake cord to lamp ground allows you to watch iPod/iPhone video/DVD video/AV input when the parking brake is engaged.

•When the parking brake cord is not connected, the monitor will not show any video sources.

•If “AUDIO ONLY” appears on the screen just after turning on the ACC power of the car, release the parking brake while confirming safety, and then engage the parking brake again.

English

Gray/Black

White

White/Black

Green

Green/Black

Blue/White

Orange/White

Blue

Brown

Grass-green

Purple/White

Front right -

Front left+

Front left-

Rear left+

Rear left-

Amplifier turn-on cord

Illumination

Auto antenna

Phone interrupt

Parking brake cord

Reverse gear cord

Parking brake lamp

cord to battery

Parking brake

Electro-tap

Parking brake signal cord

Parking brake cord (Grass- green)

How to attach the electro-tap

1.Place the Parking brake cord at the stopper, and fold it back in the direction of the arrow

2.Pass the Parking brake signal cord through, and fold it back in the direction of the arrow.

Parking brake signal

cordParking brake signal cord

Stopper

Parking brake cord (Grass-green)

guide start Quick

Note:

*1: Connecting the PHONE INTERRUPT terminal

The phone interrupt will mute the audio if the lead receives a negative or ground signal.

NX40431