English
Owner’s manual
English
Owner’s manual
TB731P/TB732P/TB733W 1514 TB731P/TB732P/TB733W
TV Mode Operations TV Mode Operations
P.SCAN
1
2
3
4
5
6
F.WIDE
62
TV1
ADJ 1
MONI ADJ
[ MODU FREQ ]
[ MODULATOR ]
[ BEEP ]
MONI ADJ
RTN
[
COLOR ]
[ HUE ]
BRIGHT
[
COLOR ]
[ HUE ]
BRIGHT
HUE
[
COLOR ]
[ BRIGHT ]
COLOR
[ HUE ]
[ BRIGHT ]
Brightness adjustment
(BRIGHT)
Darker Lighter
Hue adjustment (HUE)
More
reddish
More
greenish
Color intensity adjust-
ment (COLOR)
Black and white Color
* Hue adjustment is not possible in PAL mode.
MONIADJ
RTN
MONIADJ
MONIADJ
[a][d]
[w]
[z]
RTN
RTN
[ MODU FREQ ]
[ MONI ADJ ]
MODULATOR
ON OFF
[ BEEP ]
ADJ 1
[ MONI ADJ ]
[ MODULATER ]
MODU FREQ
ADJ 1
[ BEEP ]
8 8 . 1 0
MHz
MODUFREQ
RTN
ADJ 1
[ MODU FREQ ]
[ MONI ADJ ]
[ MODULATOR ]
BEEP ON OFF
Preset scanning
1. Press the [PS] button.
The stations stored in the preset channels
are received in sequence at intervals of
about 5 seconds per station.
2. To release the preset scanning, press the
[PS] button again.
Preset selection
1. Press the [BND] button to select TV1 or
TV2.
2. Press the [w] or [z] button to select the
preset channel.
The station in the channel which is stored in
the memory is now tuned in.
Checking out the channels
1. Press the [DISP] button.
The current channel is displayed on the
screen.
Press the [DISP] button again to turn off the
channel display.
Selecting the adjustment menu
1. Press the [ADJ] button to display the
adjustment menu screen.
Adjusting the brightness and toneof color
1. Display the adjustment menu as described
in the section, “Selecting the adjustment
menu”.
2. Press the [Î] button to display the picture
quality adjustment screen.
∗Hue adjustment is not possible in PAL
mode.
∗“HUE” and “COLOR” operations are
available only when the car is stopped and
the parking brake is applied.
3. Press the [w] or [z] button to select what
is to be adjusted, and then press the [a] or
[d] button to make the adjustment.
∗The pointer which indicates the adjustment
position moves one scale increment when
initially pushed once.
∗Press the [BND] button when all adjustments
have been made to return to the adjustment
menu screen.
Press the [ADJ] button to return to the normal
screen mode.
Setting the beep
∗The sound heard when you make operations is
called “beep”. The unit can be set up so that it
does not produce this beep sound.
∗The factory default setting is “ON”.
1. Display the adjustment menu as described
in the section. “Selecting the adjustment
menu”.
2. Press the [Å] or [Î] button to select a
desired mode and set it.
3. Press the [ADJ] button to return to the
normal screen mode.
Turning the FM modulator on/off(TB731P/TB732P only)
1. Display the adjustment menu as described
in the section, “Selecting the adjustment
menu”.
2. Press [Å] or [Î] button to select ON or
OFF.
∗Press the [ADJ] button when all adjustments
have been made to return to the normal
screen mode.
∗The factory default setting is “ON”.
Selecting the FM modulatorfrequency (TB731P/TB732P only)
1. Display the adjustment menu as described
in the section, “Selecting the adjustment
menu”.
2. Press the [d] button to display the
frequency setting screen.
3. Press the [w] or [z] button to change
frequencies.
•Frequencies can be set in the range 88.1
MHz to 89.9 MHz in 0.2 MHz increments.
•Set the FM modulator frequency to a
frequency without a FM broadcast.
∗Press the [BND] button when all adjustments
have been made to return to the adjustment
menu screen.
Press the [ADJ] button to return to the normal
screen mode.
∗The factory default setting is “88.10” MHz.
2. Press the [w] or [z] button to select the
desired adjustment menu.