28 XAZ611
English
TA (Traffic Announcement)
In T A standby mode, when a traffic announcement
broadcast starts, the traffic announcement broad-
cast is received as top prior ity regardless of the
function mode. Traffic programme (TP) automatic
tuning is also possible.
∗This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
D AB or RDS broadcast station being received has
traffic announcement programmes.
∗For details on “TA”, refer to the section “RDS op-
eration” of each owner’s manual.
● Setting TA standby mode
● Cancelling TA standby mode
● Searching for a TP station
Notes:
• If a TP station is not received, the main unit stops
the search operation.
•“TP” ma y be lit in the display when a TP broadcast
is transmitted from an RDS station. In this case,
press ISR button
9
to perform TP seek tuning.
Press ISR button
9
again to return to the previ-
ous mode.
INFO (Announcement)
In INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
● Setting INFO standby mode
If you press and hold ISR b utton 9 f or 1 second
or longer , “INFO” lights in the display and the main
unit is set into INFO standby mode until the se-
lected announcement is broadcast. When the
selected announcement broadcast starts, the
announcement item appears in the displa y . If you
press and hold ISR button 9 for 1 second or
longer while the selected announcement broad-
cast is being received, the selected announce-
ment broadcast reception is cancelled and the
main unit goes into INFO standby mode.
● Cancelling INFO standby mode
To cancel INFO standby mode, press and hold
ISR button 9 for 1 second or longer.
Digital Radio / DAB Operations
● Information select
This is a function for selecting INFORMATION
ON or OFF in Information interr upt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
1. P erform the follo wing operation depending on
the connected model.
Press and hold
ADJ button 2
for 1 second or
longer.
2. Press the right or left SEARCH button % to
select “INFO SEL”, then push ENT button #
to enter “INFO SEL ” mode .
3. Press the right or left SEARCH button % to
select an information item. You can select any
of 6 items:
4. P erform the follo wing operation depending on
the connected model.
Turn the Rotary knob $ clockwise or
counterclock wise to set the information item
for ON or OFF.
5. Press ADJ button 2 to return to the pre vious
display.
PTY
This function enables y ou to listen to the selected
programme type, irrespective of the function mode.
∗One common PTY can be selected for D AB or RDS.
∗
Of DAB PTY and RDS PTY, the PTY which is re-
ceived ear lier takes priority over the other.
∗
PTY broadcasts are not y et av ailable in all countr ies.
∗In INFO standby mode , INFO stations hav e priority
over PTY stations.
∗In TA standby mode , TP stations ha ve priority over
PTY stations.
∗For details on “PTY”, refer to the section “RDS
operation” of each owner’s manual.
● Setting PTY standby mode
INFORMATION item
ENGLISH Contents
TRAVEL TRANSPORT FLASH
WARNING WARNING / SERVICE
NEWS NEWS FLASH
WEATHER AREA WEATHER FLASH
EVENT EVENT ANNOUNCEMENT
SPECIAL SPECIAL EVENT