XAZ611 11
English
Setting the Beat EQ
This unit comes with 3 types of sound tone effects
stored in memor y. Select the one you prefer.
∗The factory default setting is “OFF”.
Each time you press BEQ button 7, the tone
effect changes in the following order :
“1 BASS BOOST” ➜ “2 IMPACT” ➜ “3 EXCITE”
➜ “USER CUSTOM” ➜ “TONE BYPASS” ➜
“1 BASS BOOST” ...
• 1 BASS BOOT: bass emphasized
• 2 IMPACT : treble emphasized
• 3 EXCITE : bass and treble emphasized
• USER CUSTOM
• TONE BYPASS
Adjusting the tone
Press A-M button @ and select the item to ad-
just. Each time you press A-M b utton @, the item
changes in the following order:
● When “1 BASS BOOST” is set
“BASS BOOST” ➜ “BALANCE” ➜ “FADER”
➜ “ST NO TITLE”
● When “2 IMPACT” is set
“HIGHT BOOST” ➜ “BALANCE” ➜
“FADER” ➜ “ST NO TITLE”
● When “3 EXCITE” is set
“IMPACT” ➜ “BALANCE” ➜ “FADER” ➜
“ST NO TITLE”
● When “USER CUSTOM” is set
“BASS<GAIN>” ➜ “MID<GAIN>” ➜ “TREB
<GAIN>” ➜ “BALANCE” ➜ “FADER” ➜“ST
NO TITLE”
● When “TONE BYPASS” is set
“BALANCE” ➜ “F ADER” ➜ “ST NO TITLE”
Adjusting the bass
1. Press A-M button @ and select
“BASS<GAIN>”.
2. Turning the Rotary knob $ clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
∗The factor y default setting is “0”. (Adjustment
range: –6 to +8)
3. When the adjustment is complete, press A-M
button @ se veral times until the function mode
is reached.
Basic Operations
Adjusting the MID
1. Press A-M button @ and select “MID<GAIN>”
2. Turning the Rotary Knob $ clockwise empha-
sizes the MID; turning it counterclockwise at-
tenuates the MID.
∗The factory default setting is “0” (Adjustment
range: -6 to +6).
3. When the adjustment is complete, press A-M
button @ se ver al times until function mode is
reached.
Adjusting the treble
1. Press A-M button @ and select
“TREB<GAIN>”.
2. Turning the Rotary knob $ clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
∗The factory default setting is “0”. (Adjustment
range: –6 to +6)
3. When the adjustment is complete, press A-M
button @ se veral times until the function mode
is reached.
Adjusting the balance
1. Press A-M b utton @ and select “BAL”.
2. Turning the Rotary knob $ clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasiz es the sound
from the left speaker.
∗ The factor y default setting is “0”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press A-M
button @ se veral times until the function mode
is reached.
Adjusting the fader
1. Press A-M button @ and select “FAD”.
2. Turning the Rotary knob $ clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasiz es the sound
from the rear speakers.
∗The factory default setting is “0”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press A-M
button @ se veral times until the function mode
is reached.