12 XAZ611
English
Adjusting the Beat EQ
1. Press BEQ button 7 and select the Beat EQ
mode (1 to 3) to adjust.
2. Press A-M button @ and select “BEQ”.
3. Turning the Rotary knob $ clockwise adjusts
in the + direction; turning it counterclockwise
adjusts in the – direction.
∗ When 1 BASS BOOST is selected, y ou can ad-
just the bass in the range of ±3.
∗ When 2 IMPACT is selected, you can adjust the
treble in the range of ±3 .
∗ When 3 EXCITE is selected, you can adjust the
bass and treble in the range of ±3.
4. When the adjustment is complete, press A-M
button @ several times until the function mode
is reached.
Turning on/off the loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect.
1. Press and hold LD button @ for 1 second or
longer to turn on the loudness effect. When
the loudness eff ect is turned on, “LD” lights in
the display.
2. Press and hold LD button @ for 1 second or
longer to turn off the loudness effect. “LD”
goes off in the display.
Basic Operations
Radio Operations
FM reception
For enhanced FM performance the
®
tuner includes signal actuated stereo control, En-
hanced Multi A GC , Impulse noise reduction circuits
and Multipath noise reduction circuits.
Changing the reception area
This unit is initially set to USA frequency intervals
of 10 kHz f or AM and 200 kHz f or FM. When using
it outside the USA, the frequency reception range
can be s witched to the intervals belo w.
● Setting the reception area
1. Press BND button ! and select the desired
radio band (FM or AM).
2 . While pressing DISP button 0, each time y ou
press and hold the number “6” of the Preset
buttons 8 for 2 seconds or longer, the recep-
tion area switches from inside the USA to
outside the USA or from outside the USA to
inside the USA.
∗ Any station preset memories are lost when the
reception area is changed.
Listening to the radio
1. Press FNC button 3 and select the radio
mode.
2. Press BND button ! and select the radio
band. Each time the button is pressed, the
radio reception band changes in the follow-
ing order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Press the right or left side of SEARCH b utton
% to tune in the desired station.
Tuning
There are 3 types of tuning mode a vailable, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press BND button ! and select the desired
band (FM or AM).
∗If “MANU” is lit in the display, press and hold
BND button ! f or 1 second or longer . “MANU”
in the display goes off and seek tuning is now
available.
2. Press the right or left side of SEARCH b utton
% to automatically seek a station.
When the right side of SEARCH button % is
pressed, the station is sought in the direction
of higher frequencies; if the left side of
SEARCH button % is pressed, the station is
sought in the direction of lower frequencies.