XAZ611 31
English
10. ERR OR DISPLAYS
ERROR 1
ERROR 2
ERROR 4
ERROR 8
ERROR 2
ERROR 3
ERROR 6
ERROR H
ERROR 2
ERROR 3
ERROR 6
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
If an error display other than the ones described abo ve appears , press the reset b utton. If the problem
persists, turn off the power and consult your store of purchase.
Error Display Cause Measure
Eject the tape then replace it with a new
one.
Remov e the caught or wound tape.
This is a f ailure of tape mechanism and
consult your store of purchase .
Eliminate the reason for which the tape is
caught.
This is a f ailure of CD changer’s mecha-
nism and consult your store of purchase .
Replace with a non-scratched, non-warped
disc.
Eject the disc then reload it properly.
Lower the surrounding temperature and
wait f or a while to cool off MD changer.
This is a f ailure of MD changer’s mecha-
nism and consult your store of purchase .
Replace with a non-scratched, non-warped
disc.
Eject the disc then reload it properly.
Load a pre-recorded MD in the MD
changer.
Tape cannot be pla y ed due to defective
tape such as cut tape.
Tape is caught and cannot be played.
Tape mode cannot be detected.
Tape is caught and cannot be ejected.
A CD inside the CD changer is not loaded.
A CD inside the CD changer cannot be
played due to scratches, etc.
A CD inside the CD changer cannot be
played because it is loaded upside-down.
Displa yed when the temperature in the MD
changer is too high and pla yback has
been stopped automatically.
An MD inside the MD changer is not loaded.
An MD inside the MD changer cannot be
played due to scratches, etc.
An MD inside the MD changer cannot be
played because it is loaded upside-down.
Displa yed when a non-recorded MD is
loaded in the MD changer.