OPTIONAL ACCESSORIES
1.K520 Utility Cart — Designed to transport the Lincoln family of small welders. Has provisions for mounting a single gas cylinder. Has front casters and large rear wheels. Handle height is easily adjustable. Bottom tray provided for tools and accessories. Easy assembly required; takes less than 15 minutes.
2.K1800-1 CO2 Adjustable Regulator and Hose Kit — Includes an adjustable pressure flow regulator for
use on CO2 cylinders.
Weld shielding gas may be obtained from a weld- ing supply distributor.
Also included is a gas hose which connects to the rear of the welder.
See “Gas Connection” in Installation section for installation instructions.
3.K1799-1 Argon-Mixed Gas Adjustable Regulator and Hose Kit (1)
Includes an adjustable pressure and flow regulator for use on argon-mixed gas cylinders. Also includ- ed is a gas hose which connects to the rear of the welder.
4. K586-1 Deluxe Adjustable Gas Regulator &
Hose Kit
Accommodates CO2 or mixed Gas Cylinders.
5.K663-2 Aluminum Welding Kit — This kit required for welding with .035 Aluminum wire. Included with this kit are a drive roll, liner and con- tact tip. It is important when changing between welding with steel wire and aluminum to exchange these components due to the lubri- cant applied to steel wire. Failure to do so may result in contaminated welds when welding alu- minum.
See Maintenance section for instructions on installing drive roll, cable liner, contact tip and their proper configuration.
(1)This regulator comes standard with a 4.5 foot hose with the SP125+.
SP-125 PLUS
6.KP666-035C Knurled Drive Roll (optional) — Reversible Drive Roll with double knurled grooves for .035 (0.9 mm) cored electrode.
7.K695-2 Spot / Stitch Timer Kit — Includes spot timer to control the spot welding arc time, and a stitch timer to control the on/off cycle time of the arc to prevent burnthrough on thin gauge metals. Also includes spot welding nozzle.
The Spot/Stitch Timer Kit installs inside the wire feed compartment, replacing the blank panel locat- ed below the gun trigger lead connectors, per the installation instructions included with the kit.
8.K697-1 Power Cord Extension — Extension 115V power cord (20’/6.1m) allows extra convenience when work is located some distance away from power receptacle.
9.K549-1 .035 (0.9 mm) Innershield Welding Kit Includes a contact tip, a gasless nozzle and a cable liner to permit the Magnum™ 100L gun and cable to use .035” (0.9 mm) diameter flux-cored elec- trode. Also included is a spool of .035 (0.9 mm) Innershield NR-211-MP.
