COMMON INTERFACE:
Slot for a Conditional Access Module (CAM) (see ‘Use a Conditional Access Module’ on page 31).
Connect a computer
Before connecting a computer to the TV
•Set the monitor refresh rate on your computer to 60Hz.
•Press 
Picture format and change the
TV picture format to [Unscaled].
Connect a computer with one of the following connectors:
Note
•Connections via DVI require an additional audio cable to connect the shared AUDIO IN L/R connector to a computer. Note that you cannot input audio from Y Pb Pr (32/42”) or VIDEO (22”) when AUDIO IN L/R is connected to a computer.
•HDMI cable
•
| AUDIO | sh |
| IN | |
L | R | |
|
| E n g l i |
•HDMI cable and
| AUDIO |
| IN |
L | R |
Assign the AUDIO IN L/R connector
If you connect audio from a computer to the AUDIO IN L/R connector at the back of the TV, you must associate it to the HDMI connector.
1 Press MENU on the remote control and select TV menu > Installation > Connections > Audio In L/R.
2 Press 
to enter the list.
3 Press 
or 
to select the HDMI connector used by the PC.
4 Press MENU to exit.
Use a Conditional Access Module
A Conditional Access Module (CAM) is provided by digital TV service operators to decode digital TV channels.
EN 31
