Manually install channels, System, Search

2 Press to enter the [Channel installation] menu.

»[Automatic installation] is highlighted.

3 Press to select [Start now].

4 Press OK.

5 Press the Green button to start.

»Installation takes several minutes.

6 When installation is complete, press the Red button to return to the [Installation] menu.

7 Press MENU to exit.

Tip

•When digital TV channels are found, the list of installed channels may display empty channel numbers.You can rename, reorder or uninstall stored channels as described below.

Manually install channels

This section describes how to search and store analog TV channels manually.

Step 1 Select your system

Note

•Skip to Step 2 Search and store new TV channels if your system settings are correct.

1 Press MENU.

2 Select [TV menu] > [Installation] > [Channel installation] > [Analogue: Manual installation].

Channel install...	Analogue: Manual...


Automatic install...	System
Installation update	Search
Digital:Test recept...	Fine tune
Analogue: Manual...	Store current ch...
Rearrange	Store as new ch...

3 Press to enter the [Channel installation] menu.

»[System] is highlighted.

4 Press to enter the [System] list.

5 Press or to select your country or region.

6 Press to return to the [Channel installation] menu.

Step 2 Search and store new TV channels

1 Press MENU.

2 Select [TV menu] > [Installation] > [Channel installation] > [Analogue: Manual installation] >[Search] .

3 Press to enter the [Search] menu.

4 Press the Red button and the Numeric buttons to manually enter the three digit frequency. Alternatively, press the Green button to automatically search for the next channel.

5 Press when the new channel is found.