Clarity c2210 Lamp, Headset Jack, Headset Operation, Ordering a Headset, Neckloop Jack, E N G L

Operating Your Telephone

E

N

G

L

the C2210 for you until you dial another phone number.

Lamp

(This function is only available with the optional Lamp Flasher Notification Accessory.) First connect the Lamp Transmitter to the telephone and the Lamp Switch to a nearby lamp. Press and hold the LAMP button for 1 second to turn the connected lamp ON or OFF.

Headset Jack

The unit includes a 2.5 mm headset jack for connection of a headset. In the headset mode, the volume of the head- set is controlled adjusting the Clarity Power Volume Control.

Headset Operation

Press the HEADSET button to enable the headset mode. Dial as normal. The HEADSET button will illuminate to indicate the phone is in the headset mode.You may switch between headset and handset usage by toggling the HEADSET button.

Ordering a Headset

In the event you wish to purchase a headset for your C2210, please contact Plantronics at 1-800-544-4660 for loca- tion near you. We recommend using the Plantronics M110 headset.

Neckloop Jack

A 3.5 mm jack is available for connect- ing a neckloop.The volume to the neck- loop is controlled by the telephone.

When the neckloop is plugged in, the handset speaker is disabled.

Hearing Aid Compatibility

The handset has a special coil inside of it to couple the sound to hearing aids equipped with T-Switches/T-Coils.

Failsafe Power Operation

In the event of a power failure, you can still make and receive calls, but the LCD display, CID/PhoneBook operations, Nightlite, and Extra Loud Ringer will not function.The phone will ring, but not as loud.

I

S

H

17