11
Rear Panel
e following descriptions are intended as a quick reference, should you have
any questions about your new product. Please see the next section (entitled
Initial Setup) for specic advice on incorporating your new amplier into your
system.
1 Balanced (XLR) Input
TwochannelsoftheAMP5supportbalancedinterconnection.When
used in a 5.1 channel system, these are intended for use with the L & R
Front channel outputs of the Sigma series SSP or those of other preamp/
processors that are equipped with balanced outputs.
Balanced audio interconnections were originally developed for the
telephone and more recently have been used in the professional audio
world for preserving the delicate nuances of extremely small microphone-
level signals. For many years now, they have also been used by
performance-oriented companies such as Classé to preserve every nuance
of the nest audio recordings in your collection.
Technically,balancedaudiointerconnectionsprovidetwodistinctbenets:
theydoublethesignal’sstrengthasittravelsfromonecomponenttothe
next,increasingthepotentialSignal-to-Noiseratioby6dB;theyalsodo
an excellent job of rejecting noise and interference that might otherwise
be picked up between the components. If executed with a high degree of
symmetry between the inverting and non-inverting signal paths, balanced
connections can oer the best performance. For this reason, we strongly
recommend using the balanced analog interconnections between your
Classé components wherever possible.
OUTPUTS
INPUTS
IN OUTIN OUT
CAN BUSRS 232
UPDATE
HOST
IN OUT
100-120~ T6.3AH 250V
220-240~ T3.15AH 250V
RISQUE DE CHOC ÉLECTRIQUE-NE PAS OUVRIR
SHOCK HAZARD - DO NOT OPEN
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
CH1
CH1
CH2
CH3
CH4
CH5
CH2
CLASS 2 WIRING
CH5
CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, GROUNDING
OF THE CENTER PIN OF THIS PLUG MUST BE MAINTAINED
AVIS! POUR RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE
LA FICHE CENTRALE DE LA PRISE DOIT ÊTRE
BRANCHÉE POUR MAINTENIR LA MISE À LA TERRE
CH4CH3CH2CH1
2 314 5 678 10 9