Classe Audio AMP5 Any combination of models in any order, For any system with SSP-300 or SSP-600

using CAN-Bus

18

The diagrams below illustrate how to connect the CAN-Bus hardware.

Any combination of models in any order.

CAN-BUS

IN OUT

CAN-BUS

IN OUT

CAN-BUS

IN OUT

CAN-BUS

IN OUT

For any system with SSP-300 or SSP-600.

CAN-BUS

IN OUT

CAN-BUS

IN OUT

CAN-BUS

IN OUT

CAN-BUS

IN OUT

NOTE: Daisy chain may need to be terminated with CAN-Bus Terminator.

CAN-Bus is controlled via the touchscreen of any Classé component that is so equipped. There is no master component, so Classé series systems where two or more units have a touchscreen can be controlled through any of the touchscreens. However, it is probably easiest to start using CAN-Bus through just one.

CAN-Bus is accessed by pressing the menu button on the face of the unit or remote, then the status button, followed by the more button.