25
Specifications
n Frequency response 10Hz – 20kHz, -1dB into 4Ω
n Output power 200W rms into 8Ω
All channels driven
400W rms into 4Ω
Any two channels driven*
n Harmonic distortion 0.018% @ 1kHz All channels
driven to 1/8th power into 8Ω
n Peak Output Voltage 116V peak to peak, 58V rms no load
116V peak to peak, 58V rms into 8Ω
n Input impedance 100kΩ Balanced / 50kΩ SE
n Voltage gain 29 dB
n Input level at clipping 1.4Vrms Balanced/SE
n Intermodulation distortion >80 dB below fundamental
into 8Ω SE
n Signal-to-Noise Ratio -100 dB at peak output into 8Ω (AES17)
n Standby power consumption Complies with EU Commission
regulation no 801/2013 of Aug 22, 2013
n Rated power consumption 200W @ 1/8th power into 8Ω
n Mains voltage 90V - 264V, 50/60Hz
n Overall Dimensions Width: 17.00” (433mm)
Depth (excluding connectors): 14.57” (370mm)
Height: 3.75” (95mm)
n Net weight 23lb (10.48 kg)
n Shipping weight 30lb (13.61 kg)
* each channel supports 400W output into 4 ohms but the AC Mains/power supply cannot support all
channels driven simultaneously at this level, which would require over 2,500W and only occur under a
special test condition. Every channel easily drives lower impedance loads.
All tests un-weighted and 20Hz – 20kHz measurement bandwidth used.
For more information, see your Classé dealer, or contact:
B&W Group Ltd.
5070 François Cusson
Lachine, Quebec
CanadaH8T1B3
Telephone +1(514)636-6384
FAX +1(514)636-1428
Internet: http://www.classeaudio.com
email: cservice@classeaudio.com
Classé and the Classé logo are trademarks of B&W Group Ltd., Worthing U.K. All rights reserved.
AMX®isaregisteredtrademarkofAMXCorporationofRichardson,TX.Allrightsreserved.
Crestron™isatrademarkofCrestronElectronics,Inc.ofRockleigh,NJ.Allrightsreserved.
Control4™isatrademarkofControl4CorporationofSaltlakeCityUT.Allrightsreserved.