Classe Audio CDT-300 owner manual Rear Panel, Analog Video Outputs

COMPOSITE S-VIDEO Pr Pb Y

100/120~ T500mAL250V

230/240~ T250mAL250V

CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, GROUNDING

OF THE CENTER PIN OF THIS PLUG MUST BE MAINTAINED

/.

/&&

AVIS! POUR RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE

LA FICHE CENTRALE DE LA PRISE DOIT ÊTRE

BRANCHÉE POUR MAINTENIR LA MISE À LA TERRE

Rear Panel

1Analog Video Outputs

The CDT-300 is equipped with a complete set of analog video outputs: Component (Y, Pb, Pr), S-Video, and Composite. The S-Video output employs the standard S-Video (mini-DIN) connector, while the Component and Composite outputs employ high quality RCA connectors.

Note that the three analog video standards offer varying degrees of performance:

•Component video renders the best analog video quality, and provides compatibility with progressive and high definition video signals. As a result, the component outputs are the analog outputs you will want to use in order to take full advantage of the video scaling and processing capabilities of the CDT-300. (The HDMI output also supports video scaling and processing.)

•S-Video is capable of rendering a high quality video image, but is limited to standard definition, interlaced signals.

•Composite video is the most common analog video interface, available on almost all display devices. Like S-video, it is also limited to standard definition, interlaced signals.

For this reason, you are advised to use component video connections whenever possible.

All three analog video outputs are active simultaneously. Connect the appropriate video output(s) of the CDT-300 to the corresponding inputs of your A/V preamplifier/processor using high quality video cables. Your Classé dealer can assist you in making an appropriate cable selection.

Note that due to Macrovision copy protection software, all HD resolutions may not be available depending on the disc.

13